ArduPilot Mega 2.x software (356)

Sort by:

Discussions	Replies	Latest Activity
Unstable throttle I was flying today, and my throttle did not react as it should. Like i set throttle to 100%, than it suddenly went back to 20%. It happene… Started by Gábor Zoltán	2	11 hours ago Reply by Gábor Zoltán
I NEED YOUR HELP Hi, For a school project I wanted to launch a little glider (flying wing) with a balloon to take pictures and that it flys to me back home… Started by Jonas H.	0	yesterday
Adding a governor PWM signal to a free output port Guru's The frame is assembled, software loaded, connections set up, almost there..... I have chosen a not "standard" configuration. Before… Started by Fred van der Ham	0	yesterday
Moderator What are the free output ports? My APM2 is hidden inside my quad, and I would like to expose the "armed" LED by running a lead from one of the open connectors to an extern… Started by Mark Harrison	0	on Wednesday
Relax patch for linux?? Hi, Looking in the ArduCopter source, I see Requires modified "mrelax" version of Arduino, which can be found here:http://code.google.com… Started by Søren Kuula	6	on Tuesday Reply by Curt Olson
APM2 on X-8 FPV This is my first use of any type of autopilot so I am probably making some kind of rookie mistake. What my problem is that I put multi swi… Started by Robert Pigeon	1	on Monday Reply by Robert Pigeon
Watchdog friendly bootloader for 2560 Attached (coming shortly, I'm testing a change to this to fix power-on condition) is a slight modification to the stock bootloader for Mega… Started by Justin	1	May 23 Reply by CensoredUser ExWikiNinja aka KF
So which message format does ArduPilot use?? Hi, I have an APM1 and an APM2, with ArduPlane 2.33 on them. Communicate fine with Mission Planner. Well sometimes the "connection" breaks… Started by Søren Kuula	14	May 22 Reply by Vernon Barry
APM 2 compatability I'm working on an UAV that will be using APM 2 and also some FPV OSD stuff. I was just wondering if there is any FPV/OSD system that works… Started by Nate C	1	May 22 Reply by Vernon Barry
What message does HK wait for after requesting to connect through COM port? I plan to (eventually) build my own GCS. So far, I've created a simple COM port rerouter (for sharing a COM port across a network) for my G… Started by Cameron Lattz	3	May 19 Reply by Cameron Lattz

‹ Previous
1
2
3
…
36
Next ›

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here.