2.4ghz conversion
Have any of you guys used the 2.4ghz DIY conversion kit from Hobby King??? I ordered one yesterday, so I'll follow up here after I install it, but I was hoping for any "heads up" that I could get before I start.
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9770...
Thanks,
Tim
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9770...
Thanks,
Tim
Replies to This Discussion
-
Permalink Reply by Chris Anderson on
-
Haven't used it but hear good things about it from others...
-
Permalink Reply by Tim McMahan on -
Ok, so I got the Corona DIY module and its AWSOME. I put it in a switch, so I can go back and forth between 2.4ghz, or my old 72mhz gear. I don't recommend it though, for the simple fact that after 2 years of routing 40 inch antennas, when you switch to 2.4ghz, you will not ever go back.....EVER. Now, for an amplifier. Not because I NEED it, just to be sure. :)
Tim
Top Content
Groups
-
ArduCopter User Group
478 members
-
ArduPlane User Group
299 members
-
ArduCopter (traditional …
77 members
-
ArduPilot (legacy) User …
77 members
-
Moderators
50 members
-
ROS User Group
31 members
-
Team Prometheus
11 members
© 2012 Created by Chris Anderson.
