3DR motor question?
Hey guys,
I'm building a new 3DR copter with Ardupilot 2.0 and was wondering what motor you guys would recommend buying if I plan on carrying a standard GoPro? The 850 Kv or 880 Kv? I know most of the new Arducopter firmware releases are based on the 850 Kv motor set-up.
Any direction would be greatly appreciated.
Adam
Replies to This Discussion
-
ModeratorPermalink Reply by Chris Anderson on -
I use 850s with a Go Pro and a 3,000mah battery and it's fine.
-
ModeratorPermalink Reply by Adam AKAV8R on -
Thanks Chris for the input.
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
DIYDrones - CNC Project
51 members
-
Moderators
58 members
-
Telemetry over cellular …
67 members
-
German Ardu-Group
41 members
-
UK Ardupilot Group
26 members
© 2012 Created by Chris Anderson.
