Anyone successful making xbee pro, xsc and xtend work together?

I've had plenty of luck getting two xbee pro's working together, or two xbee pro xsc, or two xtend-pkg's to work together....but as soon as I try mixing I never have any luck. Anyone have experience getting say an xtend-pkg to work for their ground station and have a uav flying with an xbee pro or xsc on it or vice versa?

Thanks

Views: 217

▶ Reply to This

Replies to This Discussion

Permalink Reply by Gerry Lichter on September 24, 2010 at 12:16pm
I don't. It's an interesting concept. You trying to use one ground xbee for multiple roles in the air?
Permalink Reply by george on September 24, 2010 at 2:40pm
I have 1 xbee pro xsc radio modem for my ground station...and I have xbee pro xsc on two of my uav's. For my third uav I want to just use an xbee pro, not xsc....and I want that radio modem to communicate with the one at my ground station. Haven't had any luck with that.
Permalink Reply by Toby Stein on September 24, 2010 at 4:30pm
George,
this procedure on the xbee module may work..

good luck.

Toby

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 Brainstorming Specifications.

Brainstorming Specifications.
2 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
3 ArduCopter 2.5 released!

ArduCopter 2.5 released!
4 Control Software

Control Software
5 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service