Arducopter for sale RTF

I am selling my Arducopter with everything, carbon fiber frame, Turnigy 9x TX/RX, APM plus oilpan and GPS, 2 Lipos 5000mah and 4000mah, 5 motors (1 spare), extra props, extra hobbyking v1 wooden frame.  I have crashed it a few times, but the carbon fiber frame is still strong and sturdy.  It's on eBay if anyone is interested.

[IMG]http://i39.photobucket.com/albums/e196/huskerwr38/IMG_7994.jpg[/IMG]

http://www.ebay.com/itm/260956528411?ssPageName=STRK:MESELX:IT&...

Views: 556

▶ Reply to This

Replies to This Discussion

Permalink Reply by Al W on February 16, 2012 at 9:33am

Can you define "crash"? Landed on side? Tipped over? Crashed into ground/tree? I am seriously considering bidding for it. Thanks!

Permalink Reply by Brandon on February 16, 2012 at 11:22am

I have done all of the above! :)  My most serious crashes have cracked the dome on top, which is why it isn't pictured, and I broke one of the landing gear legs.  The frame is still very strong, arms and motor mounts are in great shape. 

Permalink Reply by Al W on February 16, 2012 at 12:25pm

Appreciate the honesty. The landing gear legs don't appear to be broken. Did you fix it? Could you post more pics?

Permalink Reply by Al W on February 16, 2012 at 12:28pm

Have you mounted any payloads on it (GoPro etc) and do you know what is its carrying capacity (in grams or lbs.) ?

Thanks!

Permalink Reply by Brandon on February 16, 2012 at 1:03pm

I did fix the landing gear...Gorilla Glue is great!  However, the dome was completely smashed.  Yes, I have mounted a GoPro on it and it carried it no problem. I'm not sure what it's carrying capacity is, I suppose I could test it out tonight and let you know.

Permalink Reply by Al W on February 16, 2012 at 1:17pm

Nice! Where did you mount the GoPro on the top or beneath the drone?

Permalink Reply by Brandon on February 16, 2012 at 1:19pm

Below it with some velcro straps.

Permalink Reply by Al W on February 16, 2012 at 8:32pm

Did you build the drone yourself or buy it from a kit? I am just concerned about the compatibility of replacement parts. Thanks!

Permalink Reply by Brandon on February 17, 2012 at 11:11am

I built it myself.  I found the frame from fpvfoxtech.com, motors and TX/RX from hobbyking, esc and batteries are from hobbypartz.com.  I constructed the power distribution wire myself with 12awg wire.  

Permalink Reply by HangerRat on March 23, 2012 at 3:01pm

Is this still for sale, and what are you asking?

What version of the APM is that?

Thanks

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 Brainstorming Specifications.

Brainstorming Specifications.
2 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
3 ArduCopter 2.5 released!

ArduCopter 2.5 released!
4 Control Software

Control Software
5 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service