Replies to This Discussion

Permalink Reply by Riccardo Kuebler on March 3, 2011 at 12:28am

Hi Andrew,

 

wow that's a nice one too !

Thank you very much for posting your solution and pictures.

This finally stimulates me to rework mine :)

 

Best regards,

 

Ric

• ▶ Reply

ModeratorPermalink Reply by Hai Tran on March 3, 2011 at 6:21pm

I think I have another solution.  http://www.altronics.com.au/index.asp?area=item&id=S1119

 

If I desolder the exisiting buttons these seem the same size, but longer.  Alternatively I could just cut off some of the button and glue it to the end of my existing buttons as an extension.

• ▶ Reply

Permalink Reply by Riccardo Kuebler on March 3, 2011 at 10:52pm

Nice this one too, thanks :)

 

Ric

• ▶ Reply

ModeratorPermalink Reply by Hai Tran on March 11, 2011 at 6:21am

Ok here's my final solution to the problem with the buttons not being long enough

 

I changed to these buttons, they are exactly the same dimensions except longer.  http://www.altronics.com.au/index.asp?area=item&id=S1119

 

They look a bit too long in the picture, however, when I put a spacer to make the LCD flush with the cover, the buttons will be perfect!

Attachments:

• photo-1.JPG, 390 KB

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page