AttoPilot XYZ Horizon Sensor info
Hi,
I have an AttoPilot XYZ Horizon Sensor and an Arduino. I would like to know how to connect the sensor to the Arduino. Does anyone knows the pin layout? What I get as output from the XYZ sensor? A variable tension or a variable resistance? Any help is appreciated.
Riccardo
I have an AttoPilot XYZ Horizon Sensor and an Arduino. I would like to know how to connect the sensor to the Arduino. Does anyone knows the pin layout? What I get as output from the XYZ sensor? A variable tension or a variable resistance? Any help is appreciated.
Riccardo
Replies to This Discussion
-
Permalink Reply by Chris Anderson on
-
They're essentially identical to the Paparazzi sensor. This page will tell you what you need to know.
-
Permalink Reply by Riccardo Tacconi on -
Thanks for your reply. I cannot see any description of the pins. There is a schema saying +5 and roll and pitch output but not a correspondance of the pins.
-
-
This post may help
-
Permalink Reply by Riccardo Tacconi on
-
Yes it helps indeed :-)
Top Content
Groups
-
ArduCopter User Group
478 members
-
ArduPlane User Group
299 members
-
ArduCopter (traditional …
77 members
-
ArduPilot (legacy) User …
77 members
-
Moderators
50 members
-
ROS User Group
31 members
-
Team Prometheus
11 members
© 2012 Created by Chris Anderson.
