Battery Monitoring of Voltage

Just curious. How much voltage can the battery monitor handle on the shield? Can it also handle up to 15 volts? Thanks.

Views: 38

▶ Reply to This

Replies to This Discussion


ModeratorPermalink Reply by Thomas J Coyle III on November 5, 2009 at 2:01pm
Jerald,

I believe that V2 of the Shield board can handle a 4S Lipo.

Regards,
TCIII
Permalink Reply by Jerald Brady on November 5, 2009 at 4:02pm
Thanks

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
2 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary
3 Gauging Interest in the CNC Machine

Gauging Interest in the CNC Machine
4 Housekeeping note: Kevin Finisterre

Housekeeping note: Kevin Finisterre
5 hexa copter calibration problem

hexa copter calibration problem

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service