Digital Servo,s
Just wondering if any body is using digital servo's with their ARDU pilot and FMA Co-pilot? The reason for asking is becasue I have HS7955TG in my UAV and would like to know if they will be an issue.
Replies to This Discussion
-
ModeratorPermalink Reply by Chris Anderson on -
Never tried them, I'm afraid. They should work, but let us know how it goes.
-
Permalink Reply by Ryan on -
They will work but watch the current depending on how many HS7955TG you're planning to use - they do draw more current.
-
Permalink Reply by Simon Butterworth on -
Thanks guys, I'm not worried about the current draw because all the servos connect via a poxbox. The reason for asking is Im after a cheap autopilot to put loads of flight hours on our UAV during the test phase, it would be much easier having the UAV fly a flight pattern via GPS co-ordinates then trying to manually fly it all the time.
-
Permalink Reply by Jason Yerian on -
You shouldn't have any problems. Digital's have a high frame rate and have more power and use more power. Better centering and higher holding power. They would be idea for larger UAV's but will work find.
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
Moderators
58 members
-
ArduCopter Evolution Team
106 members
-
Learning to program the …
54 members
-
UK Ardupilot Group
27 members
-
DIYDrones - CNC Project
59 members
© 2012 Created by Chris Anderson.
