Flexipilot........

Chris

Will you sell the flexipilot by itself as I do not need the easy star glider. If so how much in GBP......

Thanks

Views: 126

▶ Reply to This

Replies to This Discussion


ModeratorPermalink Reply by Krzysztof Bosak on November 8, 2009 at 7:47am
Flexipilot itself is 999EUR plus taxes and shipment.
This gives 890GBP at 1.12 exchange rate (whoops it wasn't like this around 2002), plus shipment around 10-25GPB.
EasyUAV is 1199EUR.

Flexipilot will be test flown anyway,
and the successful integration should take anything from one 2 days to 2 weeks.
Permalink Reply by SUNEEL KAPUR on December 1, 2009 at 3:38am
I am interested in Easu UAV. May request you for your mail ID to clear my furthet quaries before lpacing order.
Suneel

ModeratorPermalink Reply by Krzysztof Bosak on December 1, 2009 at 3:51am
Feel free to ask for details
kbosak at box43.pl
Permalink Reply by Riccardo Kuebler on December 1, 2009 at 4:11am
Hey Chris,

do you reply customer too (me in this case)?

Ric

ModeratorPermalink Reply by Krzysztof Bosak on December 1, 2009 at 11:12am
Ric I had to rerun the whole batch of ALTIGPS, because the new batch of uC has completely different temperature caractertistics, and as a result, I had to redesign the whole batch.
I understand it disrupted your T3-3, you are going to receive double quantity. I was traveling this week and answering on the forum from different places with little sleep, therefore you can hear some delirium in my posts from debugging USART comms at the same time.
10 pieces are assembled and are being tested 3rd day, there are no problems so far and they will ship tomorrow.
Permalink Reply by Riccardo Kuebler on December 1, 2009 at 12:04pm
Chris,

thank you very much for your kind reply. Those are good news.
Sorry for your overload...

Ric

ModeratorPermalink Reply by Krzysztof Bosak on December 1, 2009 at 12:29pm
This was serious miscommunitation accident from my part. My fault.
Permalink Reply by SUNEEL KAPUR on December 1, 2009 at 4:13am
my mail ID......skkapur_1957@yahoo.com. Request fwd test mail.
Suneel
Permalink Reply by Ryan on November 8, 2009 at 7:54am
That is a nice amount of money there kris. It is a bit beyond the amount I want to spend on a diy project at this moment.

At that price have you sold many units?????

Thanks anyway

ModeratorPermalink Reply by Krzysztof Bosak on November 8, 2009 at 8:53am
The price around or below minimal salary in civilized countries.
People tend to evaluate their time at 0GBP/hour what means the crisis is really deep.
The price is actually 2 times lower than any existing competition.
Also a few times less than cropcam, and nothing else in the middle at this level of reliability.
Pls note that Flexipilot is a complete and supported product - I am not expecting you to debug it.
More complex than early DOS you ran on the PC.

ModeratorPermalink Reply by Sgt Ric on November 8, 2009 at 9:35am
Why are you asking Chris?

Its Kryzs you should be asking.

ModeratorPermalink Reply by Krzysztof Bosak on November 8, 2009 at 9:42am
Haha good one.
Once upon a time in France somebody put me on student's list as Kristofak. A sort of Dracula I guess.

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
2 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary
3 Gauging Interest in the CNC Machine

Gauging Interest in the CNC Machine
4 Housekeeping note: Kevin Finisterre

Housekeeping note: Kevin Finisterre
5 hexa copter calibration problem

hexa copter calibration problem

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service