force cold/warm/hot start and other settings?

Hi,
I'm fairly new to using gps. I have the locosys 5hz module.
I set it up using the tutroial (http://diydrones.com/profiles/blogs/using-the-5hz-locosys-gps-with) and was wondering if there is anyway to make my arduino do all that (i.e. cold start, set the update rate, etc.)

Thanks!

Views: 9

▶ Reply to This

Replies to This Discussion

Permalink Reply by Andrew Whipple on February 26, 2010 at 9:49pm
yea check the data sheet for comm info.

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
2 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary
3 Gauging Interest in the CNC Machine

Gauging Interest in the CNC Machine
4 Housekeeping note: Kevin Finisterre

Housekeeping note: Kevin Finisterre
5 hexa copter calibration problem

hexa copter calibration problem

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service