Help needed to troubleshoot Ardustation

Hi,

   Previously, I am unatble to get my newly purchased ardustation working. Initially, I suspected that there is no source code been loaded onto the Uno chip on my board. After some help from the experts here, I am able to compile and upload 2.0.11 onto Uno chip. However, I am still unable to get the board working.  My board status are as follows:

PWR LED         "ON"

ASC LED          "OFF"

RSS LED          "OFF"

No display on the LCD even after adjusting both potential meters on the board and pushing the reset button numerous times.

Please help and thanks in advance.

hobc100

Views: 45

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ming Cang on February 13, 2012 at 12:59am

Hi ya'll,

I have that same problem too, only the Power LED lights up the other 2 don't even after successfully compiling and uploading the 2.0.11 Ardustation 2 Source code anyone knows how to solve this problem ? Help would be greatly appreciated.

Thanks in advance to whomever replies

~Ming~

Permalink Reply by Ming Cang on February 15, 2012 at 9:47am

Anyone willing to help ?

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
2 ArduCopter 2.5 released!

ArduCopter 2.5 released!
3 Brainstorming Specifications.

Brainstorming Specifications.
4 Housekeeping note: Kevin Finisterre

Housekeeping note: Kevin Finisterre
5 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service