How to control four motor using RC?
How to control four motor using RC?
We are using AT89C2051 for generating PWM for each motor and already controlled speed of each motor by varying duty cycle using a push button.Still we are unable to control four motors using RC. We programmed for sensing PWM out of RC but value is random in each throttle position.No problem for PWM out from AT89C2051. It sensed accurately and constant value obtained for each steps.We are using P89C51RD2 for sensing PWM out.Can you help me to solve this problem?
We are using AT89C2051 for generating PWM for each motor and already controlled speed of each motor by varying duty cycle using a push button.Still we are unable to control four motors using RC. We programmed for sensing PWM out of RC but value is random in each throttle position.No problem for PWM out from AT89C2051. It sensed accurately and constant value obtained for each steps.We are using P89C51RD2 for sensing PWM out.Can you help me to solve this problem?
- Attachments:
-
-
6.bmp, 76 KB
-
Replies to This Discussion
-
Permalink Reply by shanmuga on -
you should use a wireless transmitter and reciever for rc network we used ism module for wireless transmission.
please sent the program used for pwm in 89c51
-
Permalink Reply by Emanuel Stevie
-
Hi Sanju, do you know how to interfacing accelerometer and 89c51 using i2c connection? i need the program.. Thx before..
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
South African DIY Drones…
19 members
-
DIYDrones - CNC Project
59 members
-
UK Ardupilot Group
28 members
-
ArduCopter (traditional …
114 members
-
ArduPilot (legacy) User …
94 members
© 2012 Created by Chris Anderson.
