Replies to This Discussion

Permalink Reply by Khalid Saeed on November 16, 2009 at 2:55pm

Bill,

Thanks for your reply. I used the file from the link you provided, however, I still get the same error.

• ▶ Reply

DeveloperPermalink Reply by William Premerlani on November 16, 2009 at 3:16pm

Khalid,

Oh, my, that is not good.... :-(

I have never seen this problem reported before, so it is very puzzling.

The next step is for you to contact MicroChip support. Send them the same information that you put in your posting.

Best regards,
Bill

• ▶ Reply

DeveloperPermalink Reply by William Premerlani on November 16, 2009 at 4:24pm

Khalid,

This is going to drive me crazy until we figure it out. I hope that Microchip can help you.

While we are waiting for them to answer, there are a couple of things you can try.

I looked over the installation instructions from Microchip. They mentioned that the installation might ask you for a license key and that you should leave that blank. If you did not, then you should try again, and leave it blank.

The link I gave you should have worked, but now I wonder if it took you to the same place it took me, it might have been context dependent, so...

When you first installed the compiler, did you install the student evaluation copy? If not, try to find it and install it.

If the answers to the previous questions are that you did everything right in the installation, that you left the license key blank, and installed the evaluation copy of the compiler, there is one more thing you could try.

I noticed that you have a newer version of the compiler. You have version 3.20. I am running version 3.02. Perhaps the installation for 3.20 has a bug. If you want to try rolling back to an older version of the compiler, you can download it from the Microchip archives:

http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&...

Best regards,
Bill

• ▶ Reply

Permalink Reply by Khalid Saeed on November 16, 2009 at 5:51pm

Bill,

LOL! You're just like me! I'm going to stay up all night and figure it out! :)

As for your questions, I have done each step exactly as you suggested. The only thing left to do is try the v 3.02 compiler. I'll let you know... Thanks for your help!

• ▶ Reply

• ‹ Previous
• 1
• …
• 3
• 4
• 5
• Next ›
• Page