Need help with making a jet

I am an amateur with building planes. But i want to make a jet that can fly at a fair speed and doesnt have to be quite extreme in aerodynamics. I just want to know what kind of motors to get or whatever it is inside an Rc. because i have outlaid a different skin so i just need to know what kind of motors or control boards i need.
A video would be AWESOME....but i can also follow directions

Thanks

Views: 18

▶ Reply to This

Replies to This Discussion


ModeratorPermalink Reply by Chris Anderson on November 23, 2008 at 12:10pm
Jet or ducted fan?
Permalink Reply by Ayaz Khan on November 23, 2008 at 6:49pm
ducted fans

ModeratorPermalink Reply by Chris Anderson on November 23, 2008 at 8:31pm
It's a pretty open-ended question. Have you tried any RTF ducted fans? If not, I suggest you start there to get a sense of the basics. Once you're comfortable with that, then you can try designing your own.
Permalink Reply by Ayaz Khan on November 23, 2008 at 9:18pm
cool can u guide me as to how to start with that stuff

RSS

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here. 

 

Top Content 

1 What do you think the APM should do on fail safe

What do you think the APM should do on fail safe
2 ArduCopter 2.5 released!

ArduCopter 2.5 released!
3 Brainstorming Specifications.

Brainstorming Specifications.
4 Housekeeping note: Kevin Finisterre

Housekeeping note: Kevin Finisterre
5 Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Hexa-copter found after failed attempt of delivering cell phones to inmates of a Brazilian penitentiary

Groups

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service