Replies to This Discussion

DeveloperPermalink Reply by R_Lefebvre on March 4, 2013 at 11:49am

I'm interested, but a little confused.  There are so many BLGC's going around right now, I can't keep track of what's what!  How do you fit in with the rest of the people doing this?

Permalink Reply by James on March 4, 2013 at 12:14pm

what I have here is basically a finished set of electronics..  which means... it has 1x controller board, 1x IMU board

I used the latest PCB shem/design from the team https://code.google.com/p/brushless-gimbal/

what else do you need is  1x gimbal... 2x brushless motor to rewind with 0.15mm mag wire at 60+coils each stator...

this is the open source one. not the one from AQ team costing $100eu....  the OSBLG proj is not for commercial purpose.. I personally has inform the dev team  for the production and, for sure, our purpose is to find enough people to help with making a batch... and give people chance to try this out

this is basically an individual/enthusiastic project/production

Permalink Reply by tshado on March 4, 2013 at 2:19pm

Hi James,

I am interested in buying one controller set.

I looked quickly at http://brushlessgimbal.de/ and have some questions :

- is the controller corresponding to V1.1 ?

- where can I order or find the files for the 3D printed cases ?

- if i want presoldered pins and connector, how much is the price to be added  ?

- I didn't find a lot of details about the two motors

• Engine 2822
• Engine 4404

For what kind of gimbal/camera weight is each one of these motors ?

I supposed they have to be rewounded

Where can i find these informations ?

Congratulation to all the team who developed this OSBLGC !!!!

Regards,

JC

Permalink Reply by James on March 4, 2013 at 4:01pm

it is v3 ..the latest pcb design...

i have a few people who ordered this has 3d printer.. i can refer you to some of them to see if they are willing to help

the presoldered pins and connector are for free (just you have option to have it or not)

the motor is cf2822.. i didnt find the other one either

(i believe cf2822 is mainly for gopro or card camera,, 4404 is for bigger EOS)

I'll get  rewinding info out as soon as I finished collecting the orders.. i'll send out an instruction thru email

there might be finished rewinded motors out in the next few weeks for sure

Permalink Reply by Cre8it on March 4, 2013 at 2:21pm

are these the latest revision boards?

Permalink Reply by James on March 4, 2013 at 3:57pm

yes,, v3, it was just out hours before sent out for production

Permalink Reply by Cre8it on March 4, 2013 at 6:18pm

What kind of insane deal can I get on 4 shipped?

Permalink Reply by James on March 4, 2013 at 6:47pm

literally... it will be about $5 cheaper for rest 3 (cuz shipping all four together)... which means 50+3x45=$185 to your door

DeveloperPermalink Reply by leonardthall on March 5, 2013 at 1:58am

James, I would like to get one. PM me when you get my friend request.

Thanks!

Permalink Reply by Simon on March 5, 2013 at 2:24am

James - yes I would like to place an order for one of these. Payment was to be via PayPal, is this still correct. I have placed a 'friend' reques so that you can send me further details re. confirming order. Thanks.

Permalink Reply by Erwin Felisarta on March 5, 2013 at 4:17am

I'm also interested in this. How can I order?

Permalink Reply by James on March 26, 2013 at 7:45pm

update.. the new round has just started. there are only limited quantity.(15pcs)

thanks

• ‹ Previous
• 1
• 2
• Next ›
• Page