ServoSwitch V10 Help
I have been waiting to be able to purchase a ServoSwitch V10, but does not seem to be coming in stock anytime soon. If anyone can clearly define the appropriate parts that are on their switch I would greatly appreciate it. In the diagram there are two parts JP1 and RELAY that are not clearly defined, what are these items? Thanks!
- Attachments:
Replies to This Discussion
-
Permalink Reply by Jim on -
I always thought this was a great solution if you are interested in some DIY.
http://www.rcgroups.com/forums/showthread.php?t=973183
Jim
-
Permalink Reply by Morli on -
Frank ,
Check this out and read the reviews too for common ground requirement,
-
Permalink Reply by Morli on
-
Which one Frank? if you mean the one from Hobbyking/city , the review says it all, it depends on your application whether it will take common ground or not etc. else look for picoswitch and remote RC switch. I am planning to get few with my next order.
-
Permalink Reply by Frank on -
I am meaning the ServoSwitch V10 sorry. I am looking for a more DIY project, that is capable of altering the micro-controller for my specific application.
-
Permalink Reply by Marc Daniels on -
If your micro-controller accepts PWM signals why bother with a switch? A simple 08M PICAXE can measure a servo signal and toggle its other i/o pins based on the servo position.
Top Content
Groups
-
ArduCopter User Group
478 members
-
ArduPlane User Group
299 members
-
ArduCopter (traditional …
77 members
-
ArduPilot (legacy) User …
77 members
-
Moderators
50 members
-
ROS User Group
31 members
-
Team Prometheus
11 members
© 2012 Created by Chris Anderson.
