Replies to This Discussion

Permalink Reply by Pete Hollands on May 3, 2010 at 12:28am

Igal, Super News.

• ▶ Reply

Permalink Reply by jonny on May 3, 2010 at 2:16am

Hi Igal

Excellent news, good luck with the rest of the process

• ▶ Reply

Permalink Reply by igal on May 7, 2010 at 11:43am

First flight today!!

Created simple 250mX100m 30m
const struct relative3D waypoints[] = {
{ 0 , 0 , 30} ,
{ -150 , 0 , 30} ,
{ -150 , 100 , 30 } ,
{ 100 , 100 , 30 } ,
{ 100 , 0 , 30 } ,
} ;


I took off in manual mode gain height and switched to stabilazed everything works great .
The alerons feels like fighting me but soon i discover that turning using only rudder works great .

I tryed waypoints and the plane turned to the first waypoint when getting to second waypoint the plane lost height ( i am not sure if under 30m or not) and disapired in the sun , i took over and got it back.

Then i tryed a few times RTH .
I turned off my transmiter and the plane turned and started to fly toward me but without motor .

Third time i took off in stabilized mode but for some reason the motor throtteled down almost to zero i turned to manual mode to save the plane.

Bassicly i have 3 questions :
1) What should i do to lower the stabilization for ailrons ?
2) Why the motor turns off in RTL ?
3) Is there anything that turns motor in low alttitude in stabilized mode?

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page