Replies to This Discussion

Permalink Reply by Peter Seddon on February 1, 2010 at 10:22am

We need more info as you do not specify the frequency (35,40,72 MHz, 2.4GHz) or the type of output (channelised PPM, PPM stream) you want and the transmitter you are using (just so we know if you are using a standard RC transmitter).

Peter

• ▶ Reply

Permalink Reply by Fahad Naseer on February 1, 2010 at 10:37am

The Frequency of the transmitter is 900 MHZ and antenna me using at the reciever end is Helical. me want to get Composit Vedio Signal.

• ▶ Reply

ModeratorPermalink Reply by Sgt Ric on February 1, 2010 at 3:42pm

So you mean its the video receiver you need?

• ▶ Reply

Permalink Reply by Fahad Naseer on February 1, 2010 at 8:48pm

yes it is a video reciever, that i want to build, i want to build myself not want to used already build reciever. please help me in making something new.
Thanks

• ▶ Reply

Permalink Reply by Morli on February 1, 2010 at 4:39pm

hi fahad.
here is model i bought , there are some other sites too selling similar stuff and cheap too. if you have the transmitter then buying the Rx is quicker if not cheaper too , you can use your knowledge and effort for other things like building the AP or the airframe etc. IMHO

• ▶ Reply