Please tell us a bit about your UAV interest
3DR IRIS
About
Hometown:
Hertfordshire
Activity Feed
"Hi All,I've been looking into this and have had some success with a Rx-only radio, i.e. match NetID and set Duty Cycle to zero. See this this DIY drones thread. Multiple 3DR 915Mhz radios - one for primary ground station and oth..."
My spare radio…"
My spare radio…"
"My spare radio was right in front of me so I just gave this a go!Good news - it appears to work!I've got a the quad powered on next to me, with the Rx/Tx unit on my Android connected with DroidPlanner. The RxOnly unit (Duty Cycle set to Zero, all…"
"Hi,I'm by no means an expert with these radios, but I've been wondering exactly the same thing (with the 433MHz version). According to this you achieve this by setting the duty cycle to zero on the R/O unit. There's probably loads of ways to set…"
"Joe,I'm a brand new (and very inexperienced) 3DR IRIS owner. I had this issue on the 2nd day, it turns out I accidentally changed the Voltage Monitor type in the APM Planner software whilst fiddling around. AFAIK, you can get different Voltage…"
