I have a new tricopter frame with APM 2.6 on it. When I try to perform a compass Live calibration, it starts, but get stuck with only 3 samples saved. The figure continues to spin, but it does not take any other point.
I have my new 433MHz air module. I have set both ground and air module with exactly the same settings. Now when both are powered, green led is fixed on both and both have blinking red led. So they have a bounded connection and transmit somethi
I have some trouble with my air radio module. As I could not get it connected it with my ground module, I have decided to force it into bootloader mode. So I shorted the GND and the CTS pins on my module. It is now on bootloader mode as the sol