I am connecting the battery as usual and the APM 2.5 is not lighting up. I got home and started disconnecting everything from it and finally it worked. I checked the DF13 6 position connector (voltage regulator) and it seems to be ok. Has anybody had
Read more…Hello everyone. My quad is glitching weirdly while flying in STAB mode. I uploaded firmware Quad 2.4.1 and 1.1.42 version of Mission Planner.
Please watch the video of it's sad reality. We can see the VSI indicator glitching weirdly and also the tunin
Read more…It happened right after the update to 1.1.37. It was working fine right before. This is how it looks like:
It's weird that it reads '1.1.22' on the top of the window. I downloaded 1.1.37 from the download page and opened MP from the downloaded folder.
Read more…Folks:
10 seconds after powering the APM, the right motor starts jittering.
When I test this same motor without APM, it works fine. That cancels out bad bullets, bad ESC or bad motor. I have tried a different ESC on this same output and the jittering i
Read more…I updated Mission Planner to 1.0.59 hoping to upload Arducopter 2.0.39b, but no success.
a banner pops up: 'Can't detect your APM firmware version. Please check your cabling'
I erased the EEPROM and reset the factory defaults. Mavlink seems to work f
Read more…I guess it's the same board, but just wanted to be sure. When I was ordering it online, I had the option to choose a configuration (at udrones): fixed wing or quad. I chose quad. I added a 2 way telemetry kit (xbee), a magnetometer and an ublox GPS.
Read more…
I want to make my quad more stable. The idea is to set everything up the best way possible and then use the Ardupilot board.
I am using a GAUI GU344 triaxial gyro for now. The distance between opposite motors is 120 cm (47 inches). It's total weight i
Read more…