"im having the same problem. the em406 module is blinking but the arduimu only has the green and yellow light on & the ardupilot board has a blinking blue light. the shield has no lighs on. Can anyone help??"

"where did you purchase your SKY SURFER from? I heard to stay away from Banana Hobby."

"I accepted the friend request , but the complete system is already sold, I only have for sale the simple kit fro $70 shipped."

"Hello Carlos, I am interesting in both of your systems. Please accept my friend request for sending a message to discuss with you. Best regards, Pike"

"1. Read the manual. 2. Is the tiny red LED on the EM406 off, very dimly on, brightly on, or blinking 1x per second?"

"You can use the EM406 in NMEA mode or in SiRF binary mode."

"Are you certain that the IMU is communicating through the shield? This has been a problem... regards, Mike."

"Open the arduimu pde code in Adruino, click the arduimu tab, go down few lines you will get (change 1 to 2): // This section contains USER PARAMETERS !!! // //************************************************************ // *** NOTE! Hardware…"

"Dear I joined recently, I am using the same parts as yours (AP board + Shield V2 + ArduIMY + EM406) and I am going through all the details but in the link you have mentioned its for NMEA and not EM406 (#define GPS_PROTOCOL 3)."

"Also be aware that the current IMU code won't work out of the box with the EM406. Try using the IMU code from this post. >LINK<</a>"

"it's all in the manual, here. You'll have to change a lot of other things in the config file before you can fly. Please read the whole manual and really follow the instructions closely or you'll find this a very frustrating…"

"I have the same motor mount on my Stryker_II, it will snap off in hard crash and protect the motor and plane. When mount breaks, just super glue a little carbon tow or FG fibers over cracks and works great again. I use plastic gloves to press fibers…"

"Here is a little update on the pod design , now everything will be installed on the pod (spektrum RX, rembizi osd, camera, ardupilot hardware, video TX) The batteries or battery will be installed from the bottom center of the airplane under the…"

"Only if you're in motion (walking or faster)"

"Thanks for the info and manual, Its hard to find the manuals sometimes. if I connect the GPS to the IMU board and do the testing will the drif stop?"