Dante's Discussions
ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)
Started this discussion. Last reply by Khalid Saeed Nov 17, 2009. 52 Replies 0 Likes
Dante's Page
Latest Activity
Khalid Saeed replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Bill,
LOL! You're just like me! I'm going to stay up all night and figure it out! :)
As for your questions, I have done each step exactly as you suggested. The only thing left to do is try the v 3.02 compiler. I'll let you know...…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Khalid,
This is going to drive me crazy until we figure it out. I hope that Microchip can help you.
While we are waiting for them to answer, there are a couple of things you can try.
I looked over the installation instructions from Microchip.…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Khalid,
Oh, my, that is not good.... :-(
I have never seen this problem reported before, so it is very puzzling.
The next step is for you to contact MicroChip support. Send them the same information that you put in your posting.
Best…
Khalid Saeed replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Bill,
Thanks for your reply. I used the file from the link you provided, however, I still get the same error.
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Khalid,
Here is the address of the evaluation version of the compiler. You will need to create an account to download…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Khalid,
This is the first time I've seen this error message, so I am not sure.
What I think it might be is that you downloaded the purchased version of the compiler rather than the evaluation version. For the purchased version you would need…
Khalid Saeed replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hey gang, I'm trying to "make" the project and I keep getting this error. Any ideas? I'm stymied! Thanks!
Make: The target "Z:\AileronAssistRv8b\aileronCntrl.o" is out of date.
Executing: "C:\Program…
Sandra B replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hi, bill thanks for the fast reply .
May, be you are right my problem is quite different from those with the ICD2.
I went to a friend yesterday, and i could program my GreenBoard with a his ICD2 on iDE 8.36
Looking at the microchip forum . There…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Sandra,
I am not sure if I undestand what your situation is. Are you saying that you can no longer program the green board? If so, I might be able to help you. Are you saying that you can no longer program a dsPIC33? If so, I do not have any…
Sandra B replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hello ,
Just for information. ( the same problem append to me now )
I have a green board and never had problem to program it with my original ICD3 and a custom made cable.
But since I tryed to program an other board with a dspic33 on it .
Nothing…
Belli Button replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hi All,
FWIW, I have Microchip ICD2 and it programs fine under 8.30 and 8.36 and probably 7.5 too. I think what is happening is when you start MPLab, it will give you this message. JUST IGNORE IT!
I've attached a screen shot of a typical…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Ron,
Very interesting. Since you have a Microchip ICD2, they should be willing to help you track this down.
Regarding the Olimex clone of the ICD2, Olimex investigated this issue and claims they figured out what the problem is. They have changed…
Ron Johnson replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
I have an ICD2 made by Microchip and have the same issue with a dsPIC30F4011 40 pin dip. I had MPLAB 8.33 and was able to program a dsPIC30F6014, PIC18F87J50 and a PIC18LF4620 without issue. I spent 8 hours tearing my board apart assuming I had made…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hi Sam,
You should be able to compile the code with MPLAB v7.5, without an ICD2 connected. However, you will have to rebuild the projects, because MPLAB v7.5 does not recognize v8.x project files. Here is what you need to do:
1. Make sure that you…
Sam replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
I figure it’s worth noting that I also have been unsuccessful in connecting the UAV DevBoard to the ICD2 in MPLAB v8.x.
I have E-mailed Spark fun and my understanding is that they are waiting on shipment of the new ICD2’s. However no…
William Premerlani replied to Dante's discussion 'ICDWarn0020: Invalid target device id (expected=0x101, read=0x0)'
Hi Dev,
If verification works, everything is ok. Go ahead and solder the headers, if you want. I doubt that Aaron will want to swap the UAVBoard with you, it is clear that the problem is with the ICD2. In any case, Sparkfun does not salvage any…
Comment Wall
- No comments yet!
Top Content
Groups
-
ArduCopter User Group
459 members
-
ArduPlane User Group
288 members
-
ArduCopter (traditional …
76 members
-
ArduPilot (legacy) User …
76 members
-
Moderators
48 members
-
ROS User Group
25 members
-
Team Prometheus
3 members
© 2012 Created by Chris Anderson.
