"Problem with mission planner 1.1.31 when trying to set up the modes using CH5 i see that it reports in the configuration screen OK and saves the modes but in the flight data i don't see any change of modes although i am flipping the switch back…"
Erez Ben-Eshay's Discussions
Compass Issue ver 2.025
Started this discussion. Last reply by Erez Ben-Eshay Jun 23, 2011. 5 Replies 0 Likes
I have the hold board and when i am looking into the mission planner heading after setting up the magnetometer board i have a wired problem when facing north and south no problems but facing west and…Continue
ArduCopter Range finder assmebly
Started this discussion. Last reply by Obertan Sep 28, 2011. 3 Replies 0 Likes
Hello, Could someone post the way that the IR sensors should be assembled/connected to the AP Please Continue
configurator Problems
Started this discussion. Last reply by Gareth Rens May 30, 2011. 3 Replies 0 Likes
I gust loaded the RC2 into the ardupilot mega AP but i was unable to connect to the configurator no matter what i am trying to do although the CLI works fine. Could someone explain please ? Continue
Erez Ben-Eshay's Page
Latest Activity
Erez Ben-Eshay replied to Chris Anderson's discussion ArduCopter 2.3 released"All,
I was tring to fly ver2.3 this morning without sucess it webbels strongly and flips as soon as it leaves the ground
The configuration that i am using is APM1+GPS+MAG+SONAR (radio configuration STABILIZED, LOITER, RTL)
They way that i am doing…"
Obertan replied to Erez Ben-Eshay's discussion ArduCopter Range finder assmebly"Do you which websites i can get it?"
ModeratorSebastian Gralla replied to Erez Ben-Eshay's discussion Compass Issue ver 2.025
"you can do it on your own: http://code.google.com/p/arducopter/issues/list"
John L. replied to Erez Ben-Eshay's discussion Compass Issue ver 2.025" Hi Jason
Could we please flag this as a new problem in the software.
I'm sure all users must be experiencing this mirror image compass
"
John L. replied to Erez Ben-Eshay's discussion Compass Issue ver 2.025"Yes
I noticed the same thing yesterday and have had a couple of resets to try to resolve it.
It seems to me that East and West have been swapped and the degree scale is running the wrong way.
I know I'm in the southern hemisphere but a…"
Erez Ben-Eshay posted a discussionCompass Issue ver 2.025
I have the hold board and when i am looking into the mission planner heading after setting up the magnetometer board i have a wired problem when facing north and south no problems but facing west and east give me revers readings west 90 and east 270 anyone? See More
Erez Ben-Eshay replied to Elijah Wood's discussion Arducopter HELP!"The second problem is related to ver 1.4 board that dose not supply 5V to the RC receiver from the main rail you should connect the 5V to the receiver directly form the ESC or from the Pitot 5V output on the OIL-PAN board."
ModeratorGareth Rens replied to Erez Ben-Eshay's discussion configurator Problems
"im having the same issue, i set the time out to 30 and even 100, but it doesnt connect. The timeout indicates seconds yet when you select 30, it just tries to connect 30 times...? Connection Attempt #1 ... Connection Attempt #30 ...
What am i…"
Erez Ben-Eshay commented on Chris Anderson's blog post What it takes to create a full-featured UAV like ArduCopter 2"I just got the code an going to try it soon, I am missing the DCM section can someone point me to where do you do the DCM routines in the new version"
Ante Vukorepa replied to Erez Ben-Eshay's discussion ArduCopter Range finder assmebly"I think the OP's goal was using IR sensors for obstacle avoidance, not altitude.
And that, i believe, is part of the ArduPirates trunk (albeit currently disabled)."
Erez Ben-Eshay posted a discussionArduCopter Range finder assmebly
Hello, Could someone post the way that the IR sensors should be assembled/connected to the AP Please See More
Manor A. replied to Erez Ben-Eshay's discussion configurator Problems"Had the same issue, it was solved by increasing the timeout to 10sec and above.
Sometimes it still does not connect, most of the time this is solved by closing and reopening the configurator.
"
DistributorMartint BuildYourOwnDrone.co.uk replied to Erez Ben-Eshay's discussion configurator Problems
"Erez Come down into chat, will see if we can help"
Profile Information
- About Me:
- Electrical engineer with lots of knowledge in INS systems and gyro technologies in particular.
Designer of stabilized payloads
- Tell us a bit about your UAV interest
- I am interested in a quad-copter platform for a innovative new 3D payload that i am designing and a new 3D man sensed GCS
- Hometown:
- Rehovot (Israel)
Comment Wall
- No comments yet!
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
ArduCopter (traditional …
115 members
-
DIYDrones - CNC Project
60 members
-
ArduPilot (legacy) User …
95 members
-
South African DIY Drones…
19 members
-
Moderators
57 members
© 2012 Created by Chris Anderson.
