"OK , here is a working version. It has a nice cli. Set your speed to 34800 and hit enter after start up. Needs a few details and testing finished. I need to get some sleep. You can play with it and calibrate with out servos hooked up.
latest version…"
Moderator
-
Hai Tran
- Male
- Perth, WA
- Australia
- Blog Posts (44)
- Discussions (346)
- Groups (5)
- Photos
- Photo Albums
- Videos
Hai Tran's Groups
-
DIYDrones - CNC Project
60 members
-
Western Australia
7 members
-
ArduCopter Evolution Team
106 members
-
ArduPlane User Group
381 members
-
ArduCopter User Group
617 members
Hai Tran's Discussions
Teradek Cube 255
Started this discussion. Last reply by Jake Stew yesterday. 8 Replies 0 Likes
I pulled the pin and order a Teradek Cube 255 (digital video transmitter).It uses dual band 802.11n wifi, an whilst they quote 100m, I'm hoping to get 200m using a high powered Ubiquiti Networks…Continue
Water proof multicopter
Started this discussion. Last reply by Ryan Rowell May 14. 30 Replies 0 Likes
Does anyone have any ideas on how to make the motors on a multicopter waterproof so that you can fly in rain?I've seen a few videos of multicopters flying in light rain, but I would have thought that…Continue
Using APM is a dedicated Camera Gimbal stabiliser
Started this discussion. Last reply by Denny Rowland Mar 14. 8 Replies 0 Likes
I know that Arducopter2 supports camera stabilisation, so what I would like is to have an APM that is dedicated to just camera stablisation.Can anyone help by cutting down a version of the AC2 code…Continue
Prop guards for multirotor
Started this discussion. Last reply by Roterdan Macedo Oct 10, 2011. 3 Replies 0 Likes
Does anyone know of any propeller guards that can be easily fitted to a quad/hexa. I'm thinking an tube that on one end has a 1/4 to 1/2 semi circle and connects or straps to the motor arm.…Continue
Hai Tran's Page
Latest Activity
Greg Fletcher commented on Hai Tran's blog post Bounty offered a ArduIMU+ V3 camera gimbal stabilizer
Cliff Gill commented on Hai Tran's blog post ArduIMU+ V3 camera gimbal stabilizer on IndieGoGo"With the new code, it is now operating as well. I have a bit of strange behavior when manually manipulating the gimbal via RC, but too early to tell. I have not tried adding the mediatek to the ArduIMU, should this work or cause any problems? When I…"
Jake Stew replied to Hai Tran's discussion Teradek Cube 255"Thanks for the reply. The Teradek lineup looks WAY too complicated for a DIY type project. As you mentioned, the firmware/software alone seems like a huge task.
But it would be nice to have some rudimentary digital video in the general…"
Nicol Verheem replied to Hai Tran's discussion Teradek Cube 255"John, Cube is 802.11abgn WiFi, so it's 2.4 or 5-5.8. Under your control.
Hope this helps. Let me know if you have any more questions. "
Nicol Verheem replied to Hai Tran's discussion Teradek Cube 255"Jake I didn't mean to come across as a dick, just as a proud member of the Teradek family not wanting to be ripped off, and trying to explain why the cost is so high. Certainly he can take it apart, and take pictures - I was just pointing…"
ModeratorHai Tran replied to Hai Tran's discussion Teradek Cube 255
"I'm planning on outputting 1080P from my Sony NEX7 dSLR to the Teradek. Looking at providing live video for sporting events and commercial filming from an octo.
I'm looking forward to getting the Teradek. I'm hoping that…"
John Cousins replied to Hai Tran's discussion Teradek Cube 255"Very nice indeed
I have also gone a similar route but i'm using 2 bullet M5s with a High res IP camera. (I haven't purchased the camera yet)
I do have the luxury of a little more space though :0) I have no experience with…"
Jake Stew replied to Hai Tran's discussion Teradek Cube 255"Not sure what country you are in, but I've never heard of anywhere where it is illegal to look inside a product you own.
Perhaps you misunderstood my comment. I wasn't suggesting he copy the PCB and all the components to make a…"
Nicol Verheem replied to Hai Tran's discussion Teradek Cube 255">If you get a chance to crack the case please take some pictures and write down what chips it's using. It sure would be nice to have an open hardware version.
Jake, that would be unethical, illegal, but most importantly unlikely to…"
Jake Stew replied to Hai Tran's discussion Teradek Cube 255"$1,990.00? Ouch! You must be pretty serious about something!"
ModeratorHai Tran commented on John Cousins's group Western Australia
"@John did you buy that Mugin? If so, have you flown it yet? I've thought about buying one, but its big!"
ModeratorHai Tran commented on John Cousins's group Western Australia
"A good place (if you have balls) is from the huge park in south perth, where the Boat Shed cafe and the Hobby Cats are hired. I've seen a flew gliders and FPVers fly from there, and I've flown there across the river a couple of…"
ModeratorHai Tran commented on Gary Mortimer's blog post Australia – Prepare to evacuate your unmanned aircraft
"@Andrew. That's the information I got from the CASA. I was initially concerned about this new requirement, and more concerned about the lack of RTOs able to issue qualification, but when I spoke to CASA I was advised this was to…"
ModeratorHai Tran commented on John Cousins's group Western Australia
"@James. Not having a go at you. I saw you post recommending Ascot Waters, and I just wanted to let everyone know that I think Ascot Waters isn't a great spot for FPV or even flying normal R/C.
Baywater looks like its on the edge of…"
ModeratorHai Tran commented on Gary Mortimer's blog post Australia – Prepare to evacuate your unmanned aircraft
"@Not_Sure. I'm not sure how it is possible to fight with CASA legally. Even Dick Smith didn't have much luck."
Profile Information
- About Me:
- I love to fly. My record for take offs and landings is still equal (in non UAVs). I've crashed to0 many radio controlled aircraft.
- Tell us a bit about your UAV interest
- Spent alot of time flying RC helicopters 10 years ago, wanted to build a UAV, but the technology wasn't available yet. Now it is I'd like to get back into it.
I had a Arducopter Hexa, and a APM Skywalker.
I current have a FY21 Skywalker, Zepyhr II, Parkzone Habu, Parkzone T28, Falcon wing, Droidworx Octo and CX4. Scarab Stealth Quad, MQX, Gaui 500
- Hometown:
- Perth
Hai Tran's Blog
Drone creates an eye in the sky
Posted on May 23, 2012 at 12:00am 55 Comments 2 Likes
Dolphin watchers in demand
Posted on May 21, 2012 at 5:35am 11 Comments 4 Likes
I read an article seeking volunteers to spot and report dolphin movements in the Swan River http://www.riverguardians.com/about-us/latest-news-announcements#dolphin-watchers-in-demand
In the middle of a shoot, we spotted a pod of dolphins in the river, so we…
ContinueWestern Australian companies COPTERCAM & Pixelcase team up to produce an Aerial 360 of Perth in just 60 minutes.
Posted on May 17, 2012 at 6:30am 19 Comments 5 Likes
Click on the photo to view
Western Australian companies COPTERCAM & Pixelcase team up to produce an Aerial 360 of Perth in just 60 minutes
COPTERCAM is Perth's only licenced UAV aerial photography company. www.coptercam.com.au
Pixelcase is Australia's premium virtual tour company.…
ContinueCOPTERCAM Over Hillarys Boat Harbour, Western Australia
Posted on May 12, 2012 at 4:51am 3 Comments 3 Likes
COPTERCAM 8 Aerial Camera System
Airframe: Droidworx AD8 HLE
Gimbal: Photohigher AV130
Camera: Sony NEX 7
Pilot: Andrew Muller
Camera Operator: Hai Tran
Comment Wall
- No comments yet!
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
ArduCopter (traditional …
115 members
-
DIYDrones - CNC Project
60 members
-
ArduPilot (legacy) User …
95 members
-
South African DIY Drones…
19 members
-
Moderators
57 members
© 2012 Created by Chris Anderson.
