"Thanks."
Jason's Discussions
Power to TX for FPV
Started this discussion. Last reply by Richard Boyhan Apr 7. 1 Reply 0 Likes
Hello Everyone,I have recently purchased a 5.8g tx/rc for my fpv system and have a few questions.1) The Tx claims it needs an input of 7 to 12v so I assume it is ok to hook it directly into the…Continue
Camera trigger and gimbal question
Started this discussion. Last reply by Richard Boyhan Mar 24. 1 Reply 0 Likes
Hey Everyone,I am sure there has already been a topic on this but I could not fine it. I have figured out hoe to hook up my 2-axis camera gimble but I can not figure out how to hook up the camera…Continue
Camera Trigger Question
Started this discussion. Last reply by Jason Mar 25. 5 Replies 0 Likes
Hey Everyone,I am sure there has already been a topic on this but I could not fine it. I have figured out hoe to hook up my 2-axis camera gimble but I can not figure out how to hook up the camera…Continue
FPV help
Started this discussion. Last reply by Mike Boland Mar 23. 2 Replies 0 Likes
Hello Everyone,I am trying to put together my FPV system and this is what I have so far.1) Headplay 800 by 600 goggles2) Go Pro3) Go Pro connection to transmitterNow I am thinking of purchasing the…Continue
Jason's Page
Latest Activity
"Now I found why this post was renewed.
Sure. I will send you a friend request. Maybe there is a place for a G-code group?
-=Doug
(PS - I have a totally new leg design in the works)
"
roger replied to Jason's discussion Better landing gear/legs"Doug,
Can I take your offer on sharing your gcode for the legs ... thanks."
mP1 replied to Jason's discussion Better landing gear/legs"Like everybody i am learning and smashing my carbon fibre legs. I tried a few other ideas but they all failed. I am however happy with my last attempt. Its cheap, easy to make, handles bounces and is not ruined by nasty unexpected drops.
Basically i…"
Vernon Brinker replied to Jason's discussion 3D Radio 433 help"Hello i am also having this problem, i have never used a terminal program before could you explain this process in greater detail. Thank you"
steve F11music.com replied to Jason's discussion glue on props"I've used these in the 3DR motors with no problems.
http://www.goodluckbuy.com/replacement-3-17mm-shaft-for-brushless-outrunner-motor-10-pack.html"
Richard Boyhan replied to Jason's discussion glue on props"I've not had any issues with loosing adapters. I've had issue with bent motor shafts. Thanks for finding replacement shafts."
Tim Green replied to Jason's discussion glue on props"DJI 2212/920kv motors are $24 each. They have short shafts. Their props stay on."
Dan Banks replied to Jason's discussion glue on props"I was referring to my post two posts earlier on the page. Basically, I think the adapters that came from 3DR with the motors are poorly designed/machined and are not suitable for use. And if you're going to go through the trouble of…"
Richard Boyhan replied to Jason's discussion glue on props"Excellent post. One question, you mention that 37mm was the best length, but did not recommend it. You mention something about a previous post. Could you explain?
You can use the following to press in and out motor shafts.
3/16 socket long
3/32…"
Dan Banks replied to Jason's discussion glue on props"I know this is a little bit of a necro, but I wanted to post a follow-up, and I've seen a handful of posts on the topic in other threads as well.
I ended up going with the E-flite adapters ordered through my local hobby store as planned, and…"
Jason replied to Richard Boyhan's discussion Another Power Failure Crash"Richard,
I am about to set-up my system and still have a question about the ground to the ESC. Does it matter which ESC you attach too? With all of the ESC connected to the PDB can you simply connect the ground to the "GND"…"
Richard Boyhan replied to Jason's discussion Power to TX for FPV"I heard you can use your flight battery to power your FPV. Don't use a 4S the voltage would be to high. You should not need a BEC since they normal reduce the voltage to 5 or 6 volts. Double check your specs and your voltage from your battery…"
Jason posted a discussionPower to TX for FPV
Hello Everyone,I have recently purchased a 5.8g tx/rc for my fpv system and have a few questions.1) The Tx claims it needs an input of 7 to 12v so I assume it is ok to hook it directly into the quad's 3s 11.1v 5000 ma battery? 2) Do I need a BEC inbetween the battery and TX? JasonSee More
Stephen R Mann replied to Jason's discussion Better landing gear/legs"Look at the landing gear in the video in this thread."
mP1 replied to Jason's discussion Better landing gear/legs"I also add some tape around the base to stop the screws and spacers when they separate or pop. This of course doesnt solve the legs breaking problem but at the least you dont lose the screws and spacers.
I tried gluing some carbon fibre rods to…"
Profile Information
- About Me:
- I am a forensic laser scanner, animator, and video
Forensic specialist.
- Tell us a bit about your UAV interest
- UAV would be a wonderful tool in the forensic world, and I am very excited to learn more about them.
- Hometown:
- Grass Valley, Ca
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Turkish Ardu Group
6 members
-
Documentation Editors
51 members
-
Agricultural UAVs
130 members
-
ArduPlane User Group
686 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
