"I have it set that way for my Arducopter Quad, but I can't find the setting when I "connect" my fixed wing. Am I missing something?"
MarvinS's Discussions
APM2.5+ Gone
Started this discussion. Last reply by S Dalas Mar 15. 113 Replies 2 Likes
Today I lost my quadWent out flying and was hover about 10ft high and about 30ft away. I decided to try RTL turned on the switch and the quadcopter quickly started to climb in the sky above the cloud…Continue
Turnigy 9x with Er9x firmware - Flight Modes
Started this discussion. Last reply by Jim Wittstruck Apr 21. 15 Replies 0 Likes
i have attached a file with the settings i used for my flashed 9x(er9x) These setting are the configuration for 6 flight modes within mission plannner using the ido, id1, id2 switches along with the…Continue
Mission On Linux
Started this discussion. Last reply by MarvinS Jan 7. 2 Replies 0 Likes
Based on the wiki you can run mission planner on a linux via mono but having issuesSee video on issue…Continue
3dr radio - Linux
Started this discussion. Last reply by Miguel Martín Mateo Jan 16. 3 Replies 0 Likes
Has anyone got the 3dr 433 MHz running on a Linux boxHere is a link to the driver required…Continue
MarvinS's Page
Latest Activity
Erman Ozen replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"Channel 7 can be set to rtl via mission planner and the assign to which ever switch you want. I have set mine to gear."
Don H. replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"It seems to be working. I haven't flown it yet. Still trying to figure out this 9xr/ex9r. Thanks for the profile. No way would I have figured that on out in a reasonable time.
Now if I can just get the yaw to calibrate.it stays to the right.…"
Jim Wittstruck replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"Is there any way to set up a separate switch for RTH regardless of the position (mode) my 3 position switch is in? (like on my Arducopter? )"
Bill Bonney replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"You just select GEA instead of AIL when setting up OR you can follow these instructions http://diydrones.com/profiles/blogs/mode-switch-setup-for-turnigy"
Jim Wittstruck replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"I would like to use my gear switch instead of AIL. How can I accomplish this?"
Adam Kroll replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"Can I ask what version of ER9X you have, my transmitter has version v1.283, which doesn't have the flight phases screen.
Does anyone know how to name the flight modes with the new ER9x version firmware?
Thanks,"
S Dalas replied to MarvinS's discussion APM2.5+ Gone"Yur a freak and should get some councilling, completely read your hate into my post. Loser my APM 2.5 lasted 2 friggin weeks so ya trusting it not knowing how to fly first is a recipe for a USA wide ban. Enjoy it if your there mt=r nice guy.
Get a…"
Jeff P replied to MarvinS's discussion APM2.5+ Gone"I will restate what has been said before. Someone operating a UAV who has not mastered manual flight could be a problem. Just my opinion. I fly 3D helis and you can put APM on one. A large scale Heli could cause severe damage. I think most people…"
S Dalas replied to MarvinS's discussion APM2.5+ Gone"On all my quads I have 2 laminated business cards. I do not fly auto my failsafe is my bent 2.4ghz antenna and the 2 times I thought I was losing signal I just put it straight and raised it 10" and had full range again. Never failed me and I…"
Markus Horeld replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"This is great, thank you. Much better and easier programming than others (for example this: http://diydrones.ning.com/profiles/blogs/mode-switch-setup-for-turnigy)
But a documentation of the programming in this blog post would be nice..."
Jason replied to MarvinS's discussion APM2.5+ Gone"Great idea!!! Could you give us a link to give us an idea of what you use?"
Craig Fraser replied to MarvinS's discussion APM2.5+ Gone"I started working on this just before the JD-IO board became available locally. But it's not really needed if you only want an indication similar to the LEDs on the APM board.
Follow the instructions in the wiki for compiling the main APM code…"
Ioan Ghip replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"Thank you! After you said last night that you can name them using CSs, I looked into it and I figured it out and I did it just like you, including the OR :-)
I wish there were 6 or more phases in Open9x. I should look int compiling a modified code…"
MarvinS replied to MarvinS's discussion Turnigy 9x with Er9x firmware - Flight Modes"Right click and save"
Profile Information
- Tell us a bit about your UAV interest
- Just starting
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1277 members
-
Moderators
24 members
-
ArduRover User Group
183 members
-
Telemetry over cellular …
246 members
-
ArduCopter (traditional …
179 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
