Today I lost my quadWent out flying and was hover about 10ft high and about 30ft away. I decided to try RTL turned on the switch and the quadcopter quickly started to climb in the sky above the cloud…Continue
i have attached a file with the settings i used for my flashed 9x(er9x) These setting are the configuration for 6 flight modes within mission plannner using the ido, id1, id2 switches along with the…Continue
"It seems to be working. I haven't flown it yet. Still trying to figure out this 9xr/ex9r. Thanks for the profile. No way would I have figured that on out in a reasonable time.
Now if I can just get the yaw to calibrate.it stays to the right.…"
"Can I ask what version of ER9X you have, my transmitter has version v1.283, which doesn't have the flight phases screen.
Does anyone know how to name the flight modes with the new ER9x version firmware?
"Yur a freak and should get some councilling, completely read your hate into my post. Loser my APM 2.5 lasted 2 friggin weeks so ya trusting it not knowing how to fly first is a recipe for a USA wide ban. Enjoy it if your there mt=r nice guy.
"I will restate what has been said before. Someone operating a UAV who has not mastered manual flight could be a problem. Just my opinion. I fly 3D helis and you can put APM on one. A large scale Heli could cause severe damage. I think most people…"
"On all my quads I have 2 laminated business cards. I do not fly auto my failsafe is my bent 2.4ghz antenna and the 2 times I thought I was losing signal I just put it straight and raised it 10" and had full range again. Never failed me and I…"
"I started working on this just before the JD-IO board became available locally. But it's not really needed if you only want an indication similar to the LEDs on the APM board.
Follow the instructions in the wiki for compiling the main APM code…"
"Thank you! After you said last night that you can name them using CSs, I looked into it and I figured it out and I did it just like you, including the OR :-)
I wish there were 6 or more phases in Open9x. I should look int compiling a modified code…"