"Jean-Louis, Where can we get the QuadCopter model for Xplane ?
Thx"
Matthias Badaire's Groups
-
ArduCopter User Group
617 members
-
ArduPlane User Group
381 members
Matthias Badaire's Discussions
Airspeed vs GPS speed
Started this discussion. Last reply by Ryan Beall Nov 1, 2010. 20 Replies 0 Likes
After de-briefing my flight today with almost no wind, I did some comparison between AirSpeed and GPS speed (I added airspeed to my logs).The difference is massive and explains some of the behavior…Continue
First time FPV with APM
Started this discussion. Last reply by Matthias Badaire Oct 21, 2010. 2 Replies 0 Likes
You have made my day !Today was the day that I have been preparing for the last 6 months.Here goes my FPV storySince hearing about some crazy french guys meeting every year at l'Aigle to do things…Continue
Fly by Wire B on APM
Started this discussion. Last reply by Matthias Badaire Oct 20, 2010. 20 Replies 0 Likes
I have a problem with the current implementation of FBW B.The pitch is controlled by airspeed_error -> calc_pitch functionThe throttle is controlled by airspeed_error and altitude_error ->…Continue
Throttle parameters for APM
Started Sep 7, 2010 0 Replies 0 Likes
Hi,I am not using an easystar and would like to refine my throttle parameters as I need a bit more ground speed to keep the plane in the air.I found the CH3_MIN and CH3_MAX and will change…Continue
Matthias Badaire's Page
Latest Activity
Matthias Badaire commented on Jean-Louis Naudin's blog post ArduCopter in action: Testing the QuadCopter (HIL mode) on X-Plane v9
spagoziak commented on Matthias Badaire's blog post Remzibi OSD + APM Integration v2.1.2"Is it possible to connect both a generic xbee (like the one from goodluckbuy) and remzibi simultaneously? Something like make a Y line out of serial tx and send it to both rem and xb, then ground them all the same, and send the ard tx to the…"
Hubert Czajczyński commented on Matthias Badaire's blog post Remzibi OSD + APM Integration v2.1.2"OK thanks, which version of remzibi OSD firmware are You using ?? Do i have to download completly new firmware or just .bin ??"
Matthias Badaire commented on Matthias Badaire's blog post Remzibi OSD + APM Integration v2.1.2"Yes you have to solder some pins on it."
Hubert Czajczyński commented on Matthias Badaire's blog post Remzibi OSD + APM Integration v2.1.2"Mathias, Tutorial says to connect APM to OSD via telemport but on my board i don't see any ports or pins on telemport. Do i have to solder a pins to that ?
Greetings"
Whooper commented on Matthias Badaire's blog post Remzibi OSD + APM Integration v2.1.2"Hi, I followed the instructions above (using latest 2.24+remzibi code), flashed the OSD with APM.bin and connected gnd and tx (out) from APM. OSD output shows ardupilot configuration correctly on the screen but no data is received from the APM.…"
Matthias Badaire replied to malcolm churn's discussion 600 size heli"Malcolm, thanks for all the testing.
I was thinking as well to go for a FBL controller to check that everything is ok but they do not come cheap. What price did you find ?
"
Matthias Badaire replied to malcolm churn's discussion Flybarless"This is not what the wiki used to say
http://arducopter.googlecode.com/svn-history/r2597/wiki/ArduCopter_TradHeli.wiki
"for best performance you should invest in a flybarless head but no need for a separate flybarless controller (the APM does…"
Matthias Badaire replied to malcolm churn's discussion 600 size heli"This is not what the wiki used to say
http://arducopter.googlecode.com/svn-history/r2597/wiki/ArduCopter_TradHeli.wiki
"for best performance you should invest in a flybarless head but no need for a separate flybarless controller (the APM does…"
Matthias Badaire replied to malcolm churn's discussion 600 size heli"Ah... that's really bad news . This pushes the price and complexity of the complete set dramatically.
Could you post a link to the thread that you a referring to?
Thanks"
Matthias Badaire replied to malcolm churn's discussion 600 size heli"Is that specific to the 600 ? I had a different understanding for the 450."
Matthias Badaire commented on Andrew Tridgell's blog post Getting the most out of your APM1280"+10 thanks for the ideas especially the non imu thing."
Matthias Badaire commented on Chris Anderson's blog post First impressions of FY-21AP stabilization and RTL unit"I like the altitude hold. Correct me if i am wrong but we do not have that and fbw does not do it."
Matthias Badaire commented on Chris Anderson's blog post APM1280 vs APM2560 boards -- should you upgrade?""Our hex file generator" means makefile and avrgcc in command line?"
Profile Information
- About Me:
- Easystar Ardupilot
- Tell us a bit about your UAV interest
- Easystar Ardupilot
- Hometown:
- Paris
Matthias Badaire's Blog
Remzibi OSD + APM Integration v2.1.2
Posted on May 17, 2011 at 2:30pm 45 Comments 6 Likes
Comment Wall
- No comments yet!
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
DIYDrones - CNC Project
61 members
-
ArduCopter (traditional …
116 members
-
ArduCopter Evolution Team
108 members
-
Moderators
57 members
-
UK Ardupilot Group
29 members
© 2012 Created by Chris Anderson.
