"Nice to see you have the samereflow oven as i have.
Pros use a PCB cutter if the board made right with the right Solder you dont get problems.
Pros also use a Real Stencil Printing Machine.
Nice kit
"
Pete's Page
Latest Activity
Pete commented on Pete's blog post My pick and place up and running. Can offer this service to anyone on DIY Drones"Hi Leon
The machine is a QUAD 4c with laser align. The machine is for business.
The machine spec for the machine says is will place components down to 0201 but i have not tried this 0603 is small enough.
The machine was a lot of money but it…"
Leon commented on Pete's blog post My pick and place up and running. Can offer this service to anyone on DIY Drones"Very interesting.
Can you tell us a little bit more about your your pick and place machine? What model? It might be very expensive. Is it for a business?
Leon."
jon commented on Pete's blog post My pick and place up and running. Can offer this service to anyone on DIY Drones"looks good mate"
Pete posted a blog postMy pick and place up and running. Can offer this service to anyone on DIY Drones
Getting the hang of this machine now. This is a services i can offer to anyone on diydrones i am based in the uk. Its not worth doing 1 Board but 10 is a good start. See More
Pete commented on Thomas Oldbury's blog post Help fund a new open source graphic OSD!"Thomas i live in the uk and i could help with the production of these boards where are you going to get them made.
I have a pick and place machine that i could do these on for you and i could show you where to get boards at a good…"
Pete replied to Bas van 't Hul's discussion Xbee 60MW not working in Superstable 1.5"What are they doing?
I have 2.4ghz Xbee and they work ok but i have 868 xbee pro and i am just geting full stops comming back.
Pete"
Pete commented on Blake Krone's blog post Remzibi OSD + APM Integration"Hi Guys
Where can i get one of these Remzibi OSD Units
Pete"
Pete commented on Chris Anderson's blog post Help wanted: programmer to help combine APM's PPM encoder and Arduino bootloader"If i have this right the Bootlaoder is only for boot loading the 8U2 ie to load the usb/serial and PPM code.
The code that need combining is the usb to serial and the PPM Code.
Pete
"
Pete replied to marshall scholz's discussion ardupilot imu"i was more thinking of the resistor and caps are they 0603.
If you are going to get the boards made get them made as a panel some thing like 5x5 or some thing like that/
I designed a rc switch that is .5x.75 and i have them on a panel the is…"
Pete replied to marshall scholz's discussion ardupilot imu"Hi Marshall
What size are tthe components and how would the boards come to me
Pete"
Pete commented on Chris Anderson's blog post DIY Drones 2011 Product Preview"I think i still have a ZX81 in my loft."
Pete commented on Jonathan Lussier's blog post Cheaper, simpler Oilpan"Hi Jonathan
If you need anyone to place components I have all the equipment for production.
Screen Printer
Pick & Place
Reflow Oven
"
Pete commented on Chris Anderson's blog post DIY Drones 2011 Product Preview"Great minds think alike i am also in the process of designing an all in one APM.
"
Pete commented on Jordi Muñoz's blog post Help wanted for top secret project"Hi Jordi
take a look at these guys they supply a book http://www.iosoft.co.uk/
Many thanks
Pete"
Pete commented on Dr Mike Black's blog post Wish to extend a massive congratulations to DIY Drones - Cross Country Trust Flight - Using Pure Telemetry"Adam
Adrenalin is brown and the bicycle clips on the trousers stop you shoes getting mucky.
Pete"
Profile Information
- About Me:
- I Work as an electronics design engineer that flys models:-}
- Tell us a bit about your UAV interest
- Working with Dr Mike Black
- Hometown:
- Norfolk
Pete's Blog
My pick and place up and running. Can offer this service to anyone on DIY Drones
Posted on March 1, 2011 at 6:30pm 3 Comments 9 Likes
Getting the hang of this machine now.
This is a services i can offer to anyone on diydrones i am based in the uk.
Its not worth doing 1 Board but 10 is a good…
ContinueComment Wall (1 comment)
- At 4:12pm on June 24, 2010,
ModeratorDr Mike Black said… - LOL....thanks Pete, you have been reading!..lol
Your obviously another night owl like me.....
Now reading about mapping PWM to inputs, for switching purposes
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
DIYDrones - CNC Project
61 members
-
ArduCopter User Group
617 members
-
UK Ardupilot Group
30 members
-
Telemetry over cellular …
68 members
-
ArduCopter (traditional …
116 members
© 2012 Created by Chris Anderson.
