Petroni
  • Male
  • Colorado Springs, CO
  • United States
Share Twitter

Petroni's Friends

  • Doug Weibel

Petroni's Groups

Petroni's Discussions

APM 2 lean

Started Mar 9 0 Replies

Just wanted to share that iI have had the heavy lean issue on my quad and hex with apm 1 and 2. After rebuilding a frame this week I reloaded the latest code thinking it would be gone, it wasn't.I…Continue

Board coating

Started this discussion. Last reply by Don Brooks Feb 22. 1 Reply

Is there an anti-static coating that can be put on APM2, or APM 1?  Are there components other than the barometer that cant be coated?  Just asking as I'm tired of commiting ESD crimes against my…Continue

Trim problem.

Started this discussion. Last reply by Petroni Dec 29, 2011. 2 Replies

Have a pitch (fwd/aft) trim problem with a quad and hex with the current 2.1.1, it need max sub trim and almost max normal trim to stay centered in no wind.  I know its not the aircraft motors or…Continue

Another camera stabilization question

Started this discussion. Last reply by Gareth Rens Dec 25, 2011. 1 Reply

Santa brought me camera stabilization today!I have camera stab working on a hex with the current code and there are no problems.  Shortly thereafter I started using channel 6 for in flight tuning, as…Continue

 

Petroni's Page

Latest Activity

Petroni replied to Brian Perkins's discussion Bixler Weight and Balance
"I would remove the washers.  Use a cup of boiling water to soften the glue so you don't tear the foam"
May 20

Moderator
Krzysztof Bosak commented on Petroni's blog post Possible R/C or UAV in the news again.....
"In the article we can witness some tendency for oversimplicity and fearmongering: "Three years ago, a bird strike took down a commercial airliner that managed to land safely in the Hudson River. " Actually, a few dozens of nearly…"
May 18

Developer
Randy commented on Petroni's blog post Possible R/C or UAV in the news again.....
"there's some evidence that it's a weather balloon 'cuz they found one landed nearby."
May 17
John Moore commented on Petroni's blog post Possible R/C or UAV in the news again.....
"I dont think the average American is aware of how capable homebrew UAVs are these days, I definitely didnt know until I ran across this site a few months ago and decided to build my own and when I show people what my plane can do theyre always…"
May 17

Developer
R_Lefebvre commented on Petroni's blog post Possible R/C or UAV in the news again.....
"I think this proves that UAV's have become a household word now, and possibly will become the focus of the latest media scare campaign.  Soon they'll be making movies about about a group of troubled teens who use UAV's to commit…"
May 17
John Moore commented on Petroni's blog post Possible R/C or UAV in the news again.....
"This is why I dont watch local news. "
May 17
Mike Bristol commented on Petroni's blog post Possible R/C or UAV in the news again.....
"Yeah that was a pretty sensationalist news story.  I would not like to see what the outcome of a Falcon Vs small UAV would be.  I've seen what birds do :)"
May 16
Greg Fletcher commented on Petroni's blog post Possible R/C or UAV in the news again.....
"That picture is very misleading, or was it meant to lead to fear? "We don't know what it was,but it could have crashed a jet into our city"! Typical news hype."
May 16
Mike Bristol commented on Petroni's blog post Possible R/C or UAV in the news again.....
"Still 2700 AGL is well into controlled airspace in that area.  It wasn't very specific as to exactly where this happened but there is a lot of controlled airspace in that area.  Class B above, Class C at Centennial and Class E to 700…"
May 16

Moderator
Brian commented on Petroni's blog post Possible R/C or UAV in the news again.....
"If it was a flyer, it'll be posted somewhere so that we all can get a bad wrap!"
May 16
Petroni commented on Chris Anderson's blog post Congrats to Jordi: One of MIT Technology Review's top entrepreneurs under 35 !
"Congrats!"
May 16

Developer
R_Lefebvre commented on Petroni's blog post Possible R/C or UAV in the news again.....
"Yeah, or it could have been a bird."
May 16

Developer
John Arne Birkeland commented on Petroni's blog post Possible R/C or UAV in the news again.....
"8000ft above sea level is in the typical altitude range for migrating birds. Noe idea if the season is right for that, and with the pilot only having seen "something", there will most likely never be any clear answer to what it was."
May 16

Moderator
Jack Crossfire commented on Petroni's blog post Possible R/C or UAV in the news again.....
"It was 2300 ft above ground level & 8000 ft above sea level. "
May 16
Nathaniel Caner commented on Petroni's blog post Possible R/C or UAV in the news again.....
"8000 ft...that's a little more than careless. It's reckless, and activity like this is a threat to all our legal activities. Whoever is responsible should be prosecuted. This all assumes it was an R/C Aircraft to begin with. Unfortunately…"
May 16
Bradley J Carr commented on Petroni's blog post Possible R/C or UAV in the news again.....
"Maybe. Or the pilot thought he saw something.  I am not saying it wasn't but sometimes you think you see things that aren't really there.  I am from KS so it wasn't me!!!!  Plus I can hardly get off the ground to far so…"
May 16

Profile Information

About Me:
Airplane, and Heli mechanic. Current IA.
Tell us a bit about your UAV interest
Aim to get my rc aircraft/helis certified experimental by the FAA!
Hometown:
Anchorage AK

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

Petroni's Blog

Possible R/C or UAV in the news again.....

Posted on May 16, 2012 at 12:00pm 15 Comments

Hope one didn't get away from Sparkfun HQ!…

Continue
 
 
 

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.

A list of all T3 contests is here

 

© 2012   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service