I get my magnetometer the 12January.
I didn't had time test it before this post , so I did the change today . It was looking quite easy.
But It seems I failed The module seems to be short circuit now.
the voltage on the input drop when I…
Hi, bill thanks for the fast reply .
May, be you are right my problem is quite different from those with the ICD2.
I went to a friend yesterday, and i could program my GreenBoard with a his ICD2 on iDE 8.36
Looking at the microchip forum . There…
Hi,
I thing that to have de right angle you need to know witch is the order of the euler angles you need regarding to the physics of you gimball.
if the gimball . is suspend you will have
- first a yaw rotation around Y
- then a tilt rotation…
Hello ,
Just for information. ( the same problem append to me now )
I have a green board and never had problem to program it with my original ICD3 and a custom made cable.
But since I tryed to program an other board with a dspic33 on it .
Nothing…
It seems quite a good way to send the telemetry to ground with a Xbee
As I am quite new in C30
But I just wondering about db_index it seems to be declared local in void debug_output( void )
I suppose its declared global somewhere else to be…
It look nice to begin with . But I looked at the code and also de doc directory inside. but could even not read the doc . Is that a doc you need a special linux reader ?
May be its better for me to continue on easier project like the well documented…