Comment by wayne garris on March 4, 2013 at 10:27pm

Thanks for all the info.the A2200 looks very "in budget" although the GPS is nice on the s100.
Would love to hear more about the A490 NIR.
Also, how are you guys triggering the camera?

Comment by keeyen pang on March 5, 2013 at 2:01am

My experience with " budget " camera such as Canon A 810. Even it is rated 16 MP. The result is far compare to the S 100. It will be great to serve as " Training " camera. After all, put an expensive camera on board and found it flown away may not fun.......

Comment by Bret C on March 6, 2013 at 9:53am

The benefits to the Canon S 100 is the fact that GPS will synchronize the clock.

Admin Comment by John C. on March 6, 2013 at 10:03am

Has anyone used the SX460HS?  I've been looking at that one, and I wonder why you'd prefer the S100/110 over that one.

Back on topic, getting antsy waiting on my Techpod!

Comment by Michael Pursifull on March 6, 2013 at 1:18pm

Do you know of a way to sync it to a subsecond resolution? That seems worthwhile to me. Expensive, yes, but valuable.

Admin Comment by John C. on March 6, 2013 at 3:19pm

Yep, typo....SX260HS...anyone use it?

Comment by wayne garris on March 7, 2013 at 1:40am

John, yours is on the way. You should get it by the end of the week.

Admin Comment by John C. on March 20, 2013 at 2:55pm

Hey Wayne, finally had the chance to unbox this beast and start giving it some thought.

You still think this is the best setup?   foxtech 370 kv motor , two 5000 mah 6s lipos, APC 12x8, castle ICE 50 ESC

I was going to go with 6 x HS-65MG servos....would those be OK for the elevator as well?

Thanks!

JC

Admin Comment by John C. on March 21, 2013 at 5:37pm

Ordered some parts.  On 6s, what prop would you recommend on the G10 810kv?

Thanks!

JC

Comment by wayne garris on March 22, 2013 at 9:34pm

the G10 wont do 6s. I usedthis motor to do 6s. the G10 will only to 4s max

Comment

• ‹ Previous
• 1
• 2
• 3
• 4
• Next ›
• Page