Comment by Andres on May 20, 2009 at 2:17pm

Hi:
I prefer, which are documents that can be updated
Greetings
Andres

3D Robotics Comment by Jordi Muñoz on May 20, 2009 at 2:25pm

Both can be updated.

Moderator Comment by Jack Crossfire on May 20, 2009 at 3:29pm

English is overrated. Spanish speakers with reasonable English are a better deal than English speakers with public school Spanish. People who only do English & public school French are screwed.

Moderator Comment by Jack Crossfire on May 20, 2009 at 3:30pm

If it was Arabic, you could probably make a billion dollars & retire.

Moderator Comment by Thomas J Coyle III on May 20, 2009 at 3:53pm

Hi Jordi,

I just received my two Ardupilot Shields in the mail this afternoon and I live in north TX!

I am in the process of attaching the female headers to the Shield boards as I type this.

I recommend that the female headers be mounted on their respective male headers, the Shield board aligned to the solder tails on the female headers, and the solder tails soldered to the Shield board pads. This way the Shield board female headers are perfectly aligned to the male headers on the Ardupilot board.

I think that it is best to attach the female headers first and then solder in any male headers on the top. The FTDI header will be easy to solder since it is on the outside of the female header. The other male headers (wires) may be tough to solder since they are on the inside of the female headers towards the center of the board.

Regards,
TCIII

Comment by Edson Nobrega on May 20, 2009 at 4:00pm

I prefer Picture. I think the picture show how it´s done.
Regards, Edson

Developer Comment by Mark Colwell on May 20, 2009 at 4:05pm

Jordi .pdf files would work fine.

Moderator Comment by automatik on May 20, 2009 at 6:45pm

Either way is fine (pdf vs. post). Although I don't mind MS Word documents, this would be my least favorite option due to increased risk of viruses, etc. Actually from standpoint of "security" risk I would orderem them as :
- post (least likely)
-pdf (yes you can "catch" bad exploits and other bad stuff from pdf files)
-MS Word

Comment by Sean O'Connor on May 20, 2009 at 11:24pm

A picture is worth a thousand words - I think that a picture(s) with labels (like the one above) works very well.

Comment by Dale on May 20, 2009 at 11:26pm

I have to go with PDF.
Many thanks,
Dale

Comment

• ‹ Previous
• 1
• 2
• Next ›
• Page