Comment by hamadivo on July 11, 2011 at 8:51am

Nice work.

i will try MS5611, what is price and where i can buy it?

 

Thanks.

Comment by Ahmad Usman on July 11, 2011 at 9:06am

Good project and very low cost to build

Comment by Dimitar Kolev on July 11, 2011 at 10:16am

hamadivo - ebay or http://www.embeddedadventures.com/shopdetails/pid/106

Otherwise Measurement Specialities reps

Comment by hamadivo on July 11, 2011 at 10:34am

Thanks Dimitar,

i want only the component and not a breakout + sensor.

 

Thanks.

Comment by Coptaire on July 11, 2011 at 1:49pm

@hamadivo

Found this on varesano blog:

"... If you are looking for MS5611 parts I suggest you try the following sources:

1) USA: www.servoflo.com  contact David Ezekiel david@servoflo.com
2) EU: www.amsys.de contact Norbert Rauch vertrieb@amsys.de
3) APAC: www.everestpacific.com contact Kenny Yip kenny@everestpacific.com

...''

 

Just ask :-)

Comment by Fabio Varesano on July 11, 2011 at 8:40pm

Hey, that's my work! You find all the details of the board on http://www.varesano.net/projects/hardware/FreeIMU#0.3.5 .. I'm following this thread if you have any questions.

Comment by John Leichty on July 11, 2011 at 9:29pm

Fabio, very cool, and thanks for making your designs freely available.

Could you elaborate on your choice of accelerometer and gyroscope sensors for 0.3.5 and the upcoming 0.4? How do the performance, availability, cost, and ease of use compare between the selection of sensors out there? Thanks.

Comment by Fabio Varesano on July 11, 2011 at 9:47pm

John, I can't elaborate much.. the BMA180 is a very well known and good quality accelerometer, used by other projects too (FreeFlight IMU).. same for the ITG3200. The MPU6050 which will be featured on FreeIMU v0.4 is still not available so I can't offer much insights on that.

Comment by Dimitar Kolev on July 11, 2011 at 11:02pm

Hi Fabio, sorry for not asking you first before I post here :-) I am just waiting for my two boards with MS5611. I had a talk yesterday with Meas-spec distributor and understand that these with plastic cap are already in production, but metal caps are still sampling (if somebody is interested in those details).

Comment by Fabio Varesano on July 11, 2011 at 11:37pm

Dimitar, not problems at all! I actually appreciate you guys interest in the project!

Comment

• ‹ Previous
• 1
• 2
• Next ›
• Page