Great New DIYD Firmware Upload Site for APM and PX4

 

Upload Stable, Beta or Developer Firmware to your APM or PX4 for ArduCopter, ArduPlane and ArduRover.3689511629?profile=originalThe ArduPilot Developers have put together a Great new site from which you can upload any version of Firmware Drivers to your APM or PX4 board(s).

The site is Here!: http://firmware.diydrones.com/

From this site you have access to Stable, Beta and Developer firmware builds.

Every type of ArduCopter, ArduPlane and ArduRover configuration is supported.

And the APM, the PX4FMU and the PX4FMU + PX4IO are all included.

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Thank you Tridge,

    I think that answers my question as well.

    Really nice job by the way.

  • Developer

    Thanks Gary!

    We're also looking at making the Mission Planner able to directly load firmware builds from this site.

    Cheers, Tridge

  • I have also updated the Wiki site for wiring of the PX4FMU plus PX4IO boards and added a Wiring Diagram.

    Here!: https://code.google.com/p/arducopter/wiki/PX4FMU_IORC 

  • This DIYD Firmware Upload site is now also directly linked in the ArduCopter and ArduPilot Wiki's Appendix(s)

    I made a earlier Wiki section in Arducopter that included a detailed walk through.

    That will be removed or replaced with an entry that specifically references this site.

    In the mean time if you need additional clarification of the process you can reference my Wiki entry here if necessary.

    https://code.google.com/p/arducopter/wiki/PX4FMU_PX4IO_First

This reply was deleted.