Gender
Male
About
Location
Italy
About Me:
My name is Andrea. I'm an Information Tecnology Consultant, I work in a Co-Working with Noemi S. My skills are mainly related to programming. I'm very interested in Open Source. In my free time I love to read book, study Japanese, read some news about Asian culture, do some sport (A bit of Martial Arts Tricking).
Please tell us a bit about your UAV interest
I'm currently working on an unmanned aerial vehicle which allows to perform environmental measurements in normally inaccessible or dangerous places.
Hometown:
Milano, Italy
Activity Feed
"Yes, I have already done it. Nothing change:("
"Good Morning,I have found a bug.Or at least I think so.I and 3 different Italian friend have found this probem.This is the Planner ScreenshotThis is the full parameter list.
The Gimbal does NOT move when I change the CH6 IN PWM.I can move the…"
The Gimbal does NOT move when I change the CH6 IN PWM.I can move the…"
"Thank you very much for your reply!Your analysis really help (=I have solved the problem: one of the motors was a little inclined. I didn't noticed at a first look!Thank you again (="
"I think this is the correct one.Sorry if in the previous post I had attached the wrong one.2015-12-29 10-17-22.bin"
"Hello Everyone (=Actually I have a YAW problem with my big exacopter. Is a Kongcopter X6. I have a problem on the take off and also during the flight.I tend to YAW on itself. Is like toilet bowling but is more moderate.I can not understand if it is…"
"I solved my problem about the Landing Gear (=First at all: thank you very much to everyone!The problem was the following:Landing gear that opens on copter start up.Every time I plug the battery the landing gear open itself.The solution was the…"
"Scott, actually I've been using it only in OSD mode.I can look the distance to an object by read the OSD data.For now I can not interface it with my pixahwk."
"I can not obtain the same result.Of course if I switch the CH7 I can open and close the landing gear at command.This is not a problem.The real problem is that when I switch on the PixHawk, PixHawk command the Landing Gear to Open.
So PixHawk have an…"
So PixHawk have an…"
"I'm using X-Cam X6 original landing Gear. By KongKopter."
"That's right. In my case nothing happens."
"I do not see that is a good idea using 3 compasses XD I simply would like to test. I like to test new things. So after the test I reported it.About the landing gear. Any solutions?"
"Good Morning (=I have done some testing with AC 3.3.2.Maybe I found some bug. Maybe.
1)I attacched 3 compass 1 internal to the PixHawk and 2 to the I2C.I can start the compass calibration, but it read only 2 compasses.The strange thing is that it…"
1)I attacched 3 compass 1 internal to the PixHawk and 2 to the I2C.I can start the compass calibration, but it read only 2 compasses.The strange thing is that it…"
"I have started to sperimenting with Terabee sensor.I use Teraranger One & Teraranger OSD. (I use two TerarangeOne, on for front and one for rear)I have just mounted it on my copter.If you would like to excange progress about it feel free to write me…"
"THR_MID and THR_MIN changed. Problem solved =D Now I can land my copter in the correct way.Thank you very much Randy, you solve everything (="
"Hello Everyone,I'm doing some test with some new multirotor.I have problem with land detector.This is the video.https://youtu.be/BaYIRX3O9cAAttached to this post the log.Can you find the problem?AC 3.3 Stable on VrBrain 5.2.BIN"
