Gender
Male
About
Location
Fullerton, CA
Please tell us a bit about your UAV interest
Aerial photography
Hometown:
Fullerton
Activity Feed
I have some APC multi-rotor props 13x4.5 on a 6S tarot 690 hex with 420kv motors. Im using the threaded prop adapter hub, instead of the other bolt on type prop. The APC seemed to have the best efficiency I could find in an affordable prop.…
"Did anything ever come from this? I am also looking for a flight controller with firmware to load for omnidirectional wheels on my rover. Any information would be greatly appreciated!"
"I also tried different modes but nothing still. anyone have any ideas?"
"I need to track a walking person. Do you know if its possible to get sonar to track a person in an auto mode?
I guess that leaves the option of just the laptop running mission planner when it comes to follow me?"
I guess that leaves the option of just the laptop running mission planner when it comes to follow me?"
I have a pixhawk controller and trying to layout the follow me options. As far as I can tell the only mobile GCS that provides "follow me mode" with the controller is Tower's android based GCS. Is there any others people are using?I also read this…
So I finally got the compass working, and now the ESC doesnt seem to want to calibrate. I get the pixhawk into ESC calibrating mode, and the ESC will start the musical tone, and then go straight to constant beeping. No matter what I do with the…
I have a pixhawk flashed with the latest version of ardurover and am having a hell of a time getting the compass to work. I am using the latest version of mission planner on windows 10. I got to the point where the compass calibration wouldnt even…
"Thanks for the write-up, got it working!
I have a couple questions you might be able to help me out with.
1) I cant get telemetry to work with the devo 10. I heard there might be a certain module or receiver you need to use but cant find anything…"
I have a couple questions you might be able to help me out with.
1) I cant get telemetry to work with the devo 10. I heard there might be a certain module or receiver you need to use but cant find anything…"
