"Hey
I use an APM1 for my Plane. (FPV-EPP)
Now i read, that there is a new firmware for the Mediatek GPS and the PPM Encoder.
Is the new 1.9 Firmware from the GPS compatible with the actual APM1 Arduplane Code?
And should i update my PPM Encoder, if…"

"Im new on Arduplane. (tested some Arducopter, but now i will try Arduplane)
I checked the Wiki, but i did not found any answer.

Works the Arduplane on APM1 with 2 seperate aileron servos?
I dont want to use an Y cable.
And when, where to connect…"

"Can anybody look at this log?

http://diydrones.com/xn/detail/705844:Comment:847863

I dont know, why my Hexa is not good flying with APM1....i tried all posibble PID combinations...."

"Hey

Yesterday i was on the field with my Flyduspider Hexa with the 2.5.4.
Ive Keda 20-26M Motors, HK 20A BlueSeries ESCs and 8 x 4,5 Props.

I tested some Stuff, formaly the Stabilize Mode. But, its the old problem. I cant get it stable. Its not…"

"Another Quick Question. I cant follow all ure Improvements / Threads, so:

Must i calibrate the Mag with moving Copter / Starting Mag Calibration in MP and Flying - getting automatic the needed values? Or what i have to do actually to get my Mag…"

"OMG, they did it...but...u know them - its true - its always true. They see what - and copy that...."

"Ok Ok, lets figure out, what we have....
the "old" cell monitoring is gone. the "new" is only monitoring the whole volts of my lipo, ok. thats okay.
so i know the 3,2,1 - blink code and the u4eakes code. both are working with the actual code?

all i…"

"In this case, ive a question. as i know, we dont have the battery monitoring over the 3 (3S) resistors anymore in the code, or?

so, how i monitor the battery to get these all nice blinking led stripes ?"

"Is it possible to deactivate the auto land function? the copter should loiter till i get em to the ground."

"Nice Work Devs !!!

But...i cant reproduce this nice Flying with my Hexa. (Flyduino)
I see, that u all have good Videos of your Quads, but with my Hexa, it isnt so good.

I tested the Frame / Motor / ESC Combination with other Flight Controls…"

"Hey

ive uploaded 2.4.1 and tested my Hexa in the Field. But it isnt stable in Loiter. So i investigated the problem and saw, that my Gyros seems to be not okay. So i have to ask. For me is it so, that the Gyros should be zero, if i dont move the…"

"Hey PPL

STOP!

i dont mean, that MW is better than APM. Never ever. I know, that some work to do and ive to do some work too on my PIDs, but...atm the APM flies not so stable as my MWii, as i said. So the amazing work of all is great !!! its only…"

"Hey Guys

I dont know everything about arduino / mega Code, but i ask me a question many times. I use a MultiWii Copter to have fun. its made with an Arduino, a WiiMotionPlus and a BMA020 (Acceleration). It flies so good, sooo stable, u cant believe…"