Gender
Male
About
Location
Los Angeles, CA
About Me:
My previous builds: https://picasaweb.google.com/102046385214554961345/Quadcopters?authuser=0&authkey=Gv1sRgCNH3peTqqKvuGQ&feat=directlink
Please tell us a bit about your UAV interest
FPV, Arial videography, Classic cars, Track Days, Racing
Hometown:
Los Angeles
Activity Feed
"picked up one of these frames as well as an aquacopter. http://liftoffuav.com/ While its a nice design, they use velcro to hold the top on. I plan to copy your tupperware idea to seal this frame which has WAY more room than the aquacopter."
"No but the park motors MAY. be sure to check their base shaft size."
"If you want to be sure it'll hold 350g the A1510 motors make TONS of power on 3s."
"Same issue here.
I can get power from the USB, as well as the input rail, but when powered from the output rail. The green light glows faint. None of the diodes or anything looks burned and I have never seen smoke or shorted out the APM.
Zero…"
I can get power from the USB, as well as the input rail, but when powered from the output rail. The green light glows faint. None of the diodes or anything looks burned and I have never seen smoke or shorted out the APM.
Zero…"
"wonderful spyder hexa,"
"anyone? A couple people on this forum have this exact setup just curious what mods they did/spacers."
I've notice a few things. First of all, Avroto Motors are like Rolex's, fantastic build quality and presentation. They feel amazing. I also like the Xaircraft Frame for the price. Its a nice package for what I need.I've encountered a few issues with…
"SMD5050 x6 on a PCB with built in 12v regulator. Can't beat the price either. I LOVE mine! They're insanely bright and not too bad on battery usage.
I run one at each corner or SMD5050 waterproof strips (they usually have black PCBs so look…"
I run one at each corner or SMD5050 waterproof strips (they usually have black PCBs so look…"
"anyone have any other suggestions before I pull the trigger on the xaircraft?"
"Anyone have experience with the DJI F550 and APM 2?
Seems the Xaircraft DJI CF hexa frame is a hit with APM 2....
Thanks!"
Seems the Xaircraft DJI CF hexa frame is a hit with APM 2....
Thanks!"
I've got the APM 2, a 3DR 915Mhz Telemetry set on its way, and a MB1200 XL-MaxSonar®-EZ0 Sonar unit as well.I didn't have the best luck with APM1 but I blame this on lack of experience and the frame I was using. Since then it seems APM has matured…
"can anyone confirm which standoff they ended up using for the motors?
"
"
"gotcha well thanks for the response Jan!
would you mind sending them to daign2002 at gmail dot com?
I'll try and find someone willing to make mounts."
would you mind sending them to daign2002 at gmail dot com?
I'll try and find someone willing to make mounts."
"Jan Vervoorst would you be willing to make some sets of those motor mounts. I'd be happy to pay via paypal. Otherwise my build is at a standstill :/
"
"
"damn. so we don't have any stateside solution for motor mounts?
I've got nearly everything ordered already, including those APA connectors :/
"
I've got nearly everything ordered already, including those APA connectors :/
"
"Building one of these too!"
