About

Gender

Male


Location

León


Please tell us a bit about your UAV interest

Interested in Aerial Photogrammetry


Hometown:

Cubillos del Sil


Activity Feed

Enoc Sanz-Ablanedo commented on Jesus A's blog post SAMSUNG NX2000 (different trigger than rest of NX series) Trigger from APM/Pixhawk
"I can confirm that the Samsung NX500 has the same behaviour than this NX2000. I´ve done a very similar board (my first electronic project!) to Jesus´s board. It is not the same because the shopman in the electronics store sold me non double relays,…"
May 15, 2015
Enoc Sanz-Ablanedo commented on naish's blog post X8 3D scanning
"Thank you!"
Feb 27, 2015
Enoc Sanz-Ablanedo replied to John Kob's discussion apm planner arduplane v 3.0.3 mavlink problem
"Same problem, I´ve returned to 3.0.1 without problem. Did you solve the problem?."
Jun 5, 2014
Enoc Sanz-Ablanedo commented on Gisela & Joe Noci's blog post Mission Planner Legal use of Google Maps/Earth content
"Obviously, all of us don't respect Google's Terms and restricciones. Personally, I'm not going to try justify myself, just enjoying while posible."
Nov 23, 2013
Enoc Sanz-Ablanedo replied to Andrew Tridgell's discussion ArduPlane 2.73 released
"The RLog2013-05-14 12-10-04.rlog"
May 16, 2013
Enoc Sanz-Ablanedo replied to Andrew Tridgell's discussion ArduPlane 2.73 released
"the Tlog2013-05-14 12-10-04.tlog"
May 16, 2013
Enoc Sanz-Ablanedo replied to Andrew Tridgell's discussion ArduPlane 2.73 released
"I´m not sure if I had the flyaway bug or another bug with 2.72. In the figure can be show that only could do the mission the first time because the alt_error_nav was increasing! despite it was the same mission. The other 2 times, in auto mode  the…"
May 16, 2013
Enoc Sanz-Ablanedo replied to Andrew Tridgell's discussion ArduPlane 2.72 released
"Yesterday I had a crash when trying 2.72 with my skywalker and default params. I suposse it was my fault but I´m not sure, so some help is need.
Mission was programmed to 100 m altitude. With stabilized  I went to 120 m, and then switch to Auto.…"
May 6, 2013
Enoc Sanz-Ablanedo commented on Enoc Sanz-Ablanedo's blog post Geometric Camera Calibration for use in Photogrammetry
"Without convergency is not possible a realistic modelization of radial distortion in all area of sensor. I think best methodology is start the automatic tie points referencing from an static calibration, and then to do a refinement throught a…"
Apr 22, 2013
Enoc Sanz-Ablanedo commented on Enoc Sanz-Ablanedo's blog post Geometric Camera Calibration for use in Photogrammetry
"Martin, targets are identified automatically. Most of precessing is done with Photomodeler. I stay on the ground during all imaging capture. I agree totally with you that a 3D calibration field ( non planar) and taking images flying would be better.…"
Apr 22, 2013
Enoc Sanz-Ablanedo posted a blog post
Most of photo mapping online services and several softwares as Photoscan use Self-Calibration method for modelling internal geometry of cameras. While this approach is simple and practical, don´t provides the best results because the low convergence…
Apr 22, 2013
Enoc Sanz-Ablanedo replied to Randy's discussion ArduCopter 2.9 / 2.9.1 released
"List of strange behavior in 2.9:- (Auto) Restart after third point? Mission Why?- When Switching to RTL mode, the hexa speeds off to an unknown (the same happened to Marvins, Willie Botha, Richard Boyhan, James W Powell, Jeff Cook, Vijay Singh, Dave…"
Jan 31, 2013
Enoc Sanz-Ablanedo commented on Exmaps's blog post New 433Mhz Tracking Antenna
"Please, give more details"
Dec 12, 2012
Enoc Sanz-Ablanedo posted a photo
APM 2.5 Talon project
Oct 12, 2012