Gender
Male
About
About Me:
Helicopter flyer, wanting a more stable AV platform, so building a quad.
Please tell us a bit about your UAV interest
Aerial photography and video
Hometown:
Florida
Activity Feed
Hello, can anyone explain in full detail how Simple mode is designed to work?From arming the motors in Simple mode, to flying, changing yaw angle intentionally, switching to other modes, etc.Is it better with compass on, sonar on, or does it…
Hello, I have loaded the latest (2.0.33) code and used both mission planner and CLI to do the setup, but even though I can take off and have a level flight, the copter is rotating constantly clockwise...I have about no control over the yaw.I am…
"So is it possible to combine modes?
I mean, to have stabilized mode along with simple mode, along with RTL, etc..?"
I mean, to have stabilized mode along with simple mode, along with RTL, etc..?"
"If you use the zipped beta code with a DIY mag attached to wires instead of soldered, what is the default position you should mount it?
"
"
"2nd that...I would like to be able to have the quad always in Stabilize mode, always in Simple mode, and have the switch be able to handle position hold and RTL functions.
Can someone explain how you would accomplish this?
Thanks
"
Can someone explain how you would accomplish this?
Thanks
"
"Anyone try the Hoverfly pro board recently? from what I read, it seems to be holding up to the hype.
"
"
Hello, I have the trunk Mega code uploaded and everything seems to be configured ok but I am not sure what the dip switch settings are supposed to be...Thanks
Hello, I read where the new Arducopter Mega code was going to be released Feb/March and wanted to find out if that is still going to happen since March is almost over.If it is coming within the week, I won't continue tuning the Pirates NG code too…
"I have also timed this process..it seems you need to wait at least 5 minutes for a decent number locked, the longer (20 minutes>) the better...must be a faster/better way?
"
"
Just wondering if this will also be included or is this something already possible?In-case you lost signal or became out of range, the quad would slowly descend and land using sonar etc.Also in a low battery condition, etc...
"Just to confirm, will this "carefree" mode be available and included in the next ACM code release?
"
"
"Yes, I am also having a hard time tuning the Position Hold PID values...my quad is a bit heavy and I had to adjust the stable PID's quite a bit to make it stable..now my problem is Position Hold...the best I can get is the quad flying large circles…"
Hello, I was wondering if and how can you hook up one of these small cameras to the APM/Shieldhttp://hobbywireless.com/cart/index.php?main_page=product_info&cPath=6&products_id=339&zenid=3b96e6d8e585697ffdde7675362cd56c It has pan and tilt servos…
Hello, can we get a list of PID settings for a variety of quads...i.e. different weights, etc.My quad is a bit heavy (flying weight around 2kg) and I had to make the position hold P value "6" to get a nice stable flight, but the Position Hold…
