Gender
Male
About
Location
Saint valery en caux, France
About Me:
39 years, french, maried, 3 kids, policeman.
Please tell us a bit about your UAV interest
since a few months, i'm read a lot of subject of DIY Drones, i have discovered with chance, and since, i want to create a multirotor with ardupilot mega. i have create one with kk board.
Hometown:
île de france
Activity Feed
"please, how to preserve connections for rotary motors via ardumoto shield for it could works with ardurover ?"
"thanks for your answer,
but some problems come to mind. in fact that the arduroller code has already more than a year, could it be updated with the latest developments and integrations apm code, and possibly if I had to do it manually, what are the…"
but some problems come to mind. in fact that the arduroller code has already more than a year, could it be updated with the latest developments and integrations apm code, and possibly if I had to do it manually, what are the…"
"hi,
since this project have been started, could i use source code with pixhawk board ?
which issue could result about pixhawk board using ?
gautier"
since this project have been started, could i use source code with pixhawk board ?
which issue could result about pixhawk board using ?
gautier"
"ok, i have found another solution : burnt my second apm board....
and i don't know how..., atmel become very hot and one led light, power on. others, mux and ppm are off. my apm board is dead.
so... one solution : go to the trash !
i'm really angry…"
and i don't know how..., atmel become very hot and one led light, power on. others, mux and ppm are off. my apm board is dead.
so... one solution : go to the trash !
i'm really angry…"
"very impressive and informative post. most of time, we forget the risky situations could make by lipo battery."
first post for yet another problem.I have changed the ArduPilot Mega board because of a short circuit that I have created. but before changing the card, only the inputs and outputs were blurred. everything worked fine, 3dr radio and my new ublox 6q…
"interesting, but work it like xbee with more distance ?"
"malheureusement non, ou peut être plus tard si un francais se dévoue..."
"est ce que tu as essayé une connection de la carte sous arduino ?
tu peux peut être réinstaller le firmware à l'aide du configurateur arduino.
bon courage à toi, c'est tendu quand ça fonctionne pas correctement."
tu peux peut être réinstaller le firmware à l'aide du configurateur arduino.
bon courage à toi, c'est tendu quand ça fonctionne pas correctement."
"switch loiter mode is only the way for the quad stay on the gps position, or before we must define loiter point with a another switch like channel 7 ?"
it's been a while since I downloaded the logs of my flights via the CLI, but when I connect it provided me any logs in the download window. I have to type "Logs" and "a dump" to display the data, then copy it in those notepad recording with the…
"you say "it's better though to change in leds.pde...", but there's no relay_on or other in this file, i think u would say running_Lights.pde
but when i change relay_on with dot, it return error message about "."
i think my relay is "ko" , in CLI…"
but when i change relay_on with dot, it return error message about "."
i think my relay is "ko" , in CLI…"
"with new code 2.0.49, must i insert this lines code :
loop_step = 5;
medium_loopCounter = 0;
delta_ms_medium_loop = millis() - medium_loopTimer;
medium_loopTimer = millis();
because it caused a error message in arduino when i compile…"
loop_step = 5;
medium_loopCounter = 0;
delta_ms_medium_loop = millis() - medium_loopTimer;
medium_loopTimer = millis();
because it caused a error message in arduino when i compile…"
"i'm confused, this code must be placed in the bottom of APM Config.h or events.pde ?
static void relay_on(){ PORTL |= B00000100;}static void relay_off(){ PORTL &= ~B00000100;}static void relay_toggle(){ PORTL ^= B00000100;}
"
static void relay_on(){ PORTL |= B00000100;}static void relay_off(){ PORTL &= ~B00000100;}static void relay_toggle(){ PORTL ^= B00000100;}
"
"I did what described in the title, but no LED lights. I tried several things with the code 2048 and 2.0.49, and try with not changing the line/ / This box controls the slow loop//---------------------------------case 4:medium_loopCounter = 0;if…"
