Gender
Male
About
Location
tehran,tehran
About Me:
Hi I am an Eng Student I want to learn, not concerning who i want to learn from
Please tell us a bit about your UAV interest
I am interested in any vehicle with the ability of being controlled from distance(remote control) I am recently becoming familiar with arduino and APM so i think that your website can help me
Hometown:
zavareh
Activity Feed
"can you show me steps of configuring and setting up of the module? Jason Franciosa said:
Yes it works, I have done it, but it's not reliable and range is horrible. I recommend against it."
Yes it works, I have done it, but it's not reliable and range is horrible. I recommend against it."
"No
I think there should be methods using some applications ( which is available in github) for changing code and uploading it directly to pixhawk
in Arduino and then upload using Arduino.
Once you have it loaded on the board then use MP to do the…"
I think there should be methods using some applications ( which is available in github) for changing code and uploading it directly to pixhawk
in Arduino and then upload using Arduino.
Once you have it loaded on the board then use MP to do the…"
"Hi
look, the telemetry board works solely and transmits and receives data. but there are two problems. 1 its loop back doesnt work
2 the mission planner can not receive heart beat
I dont know what to do and how to go forward John said:
HI mohsein, …"
look, the telemetry board works solely and transmits and receives data. but there are two problems. 1 its loop back doesnt work
2 the mission planner can not receive heart beat
I dont know what to do and how to go forward John said:
HI mohsein, …"
"unfortunately I have not get successful in solving the problem
but my guess is that there should be some problem in the USB to serial devices which have been used in this middle
hope to solve it soon"
but my guess is that there should be some problem in the USB to serial devices which have been used in this middle
hope to solve it soon"
"unfortunately I have not get successful in solving the problem
but my guess is that there should be some problem in the USB to serial devices which have been used in this middle
hope to solve it soon
pray for us"
but my guess is that there should be some problem in the USB to serial devices which have been used in this middle
hope to solve it soon
pray for us"
"Hi naish
thank you for your concern to the subject
actually I am away from the lab for afew days. but your recommendation seems smart and I will take it as I go to the lab.
I will let you know the result
thank you so much
regard"
thank you for your concern to the subject
actually I am away from the lab for afew days. but your recommendation seems smart and I will take it as I go to the lab.
I will let you know the result
thank you so much
regard"
"can we do such a procedure for the microhard nano series n920
?
has any body the experience of working with such hardware?
any help would be appreciated
thank you so much"
?
has any body the experience of working with such hardware?
any help would be appreciated
thank you so much"
"Hi
nice job
can you please give me more detail about your job. was it to connect pixhawk to mission planner
thank you
regard"
nice job
can you please give me more detail about your job. was it to connect pixhawk to mission planner
thank you
regard"
"Hello dear
thank you so much for your concern about the matter
actually i have gone through all of the steps you mentioned above
the point is that when we check the performance of the link with the serial terminals like h-terminal or docklight we…"
thank you so much for your concern about the matter
actually i have gone through all of the steps you mentioned above
the point is that when we check the performance of the link with the serial terminals like h-terminal or docklight we…"
"Hi dear Michele
I want to connect pixhawk to gcs via n920 telemetry link. when we test this link separately with serial terminal it works good and can send and receive data perfectly but when I connect it to the pixhawk it can not connect it to the …"
I want to connect pixhawk to gcs via n920 telemetry link. when we test this link separately with serial terminal it works good and can send and receive data perfectly but when I connect it to the pixhawk it can not connect it to the …"
"Hi dear surao
could you find any way for doing this
I am also looking for a way to connect pixhawk to gcs via microhard n920
i would appreciate you if you help me in this way
thank you so much"
could you find any way for doing this
I am also looking for a way to connect pixhawk to gcs via microhard n920
i would appreciate you if you help me in this way
thank you so much"
"Hello
thank you for making such subject
I have recently connected a nano series to the pixhawk but it can not connect to the mission planner. the link has no problem and it can get and send data correctly. i have set the baud rate to the 57600 (both…"
thank you for making such subject
I have recently connected a nano series to the pixhawk but it can not connect to the mission planner. the link has no problem and it can get and send data correctly. i have set the baud rate to the 57600 (both…"
"I think there should be some way by using github desktop but I dont know exactly how"
"@James
I watched that video
it is actually hard to do it when you have a big heavy compter which includes breakable blades.
is there any way to use magnetometer callibration parameters gained for some other vehicles in that situation?"
I watched that video
it is actually hard to do it when you have a big heavy compter which includes breakable blades.
is there any way to use magnetometer callibration parameters gained for some other vehicles in that situation?"
Hello every bodyI want to make changes in the battery failsafe method of copter V3.3.3I want to know that how I can do that?is there any documentation to get help fromthank you all so muchregards
"thank you so much for the reply\
I will watch it as soon as possible
thank you"
I will watch it as soon as possible
thank you"
